View Issue Details

IDProjectCategoryView StatusLast Update
0005236CentOS-6kernelpublic2011-11-10 07:57
Reportersigru 
PrioritynormalSeveritymajorReproducibilityalways
Status resolvedResolutionfixed 
Platformx86_64OSCentOS LinuxOS Versionrelease 6.0
Product Version6.0 
Target VersionFixed in Version 
Summary0005236: WARNING: at drivers/scsi/scsi_transport_fc.c:3503
DescriptionAfter upgrade Centos 5.6 to CentOS 6.0 dmesg generate report like it:
WARNING: at drivers/scsi/scsi_transport_fc.c:3503 fc_bsg_jobdone+0xb1/0xd0 [scsi_transport_fc]() (Not tainted)
Hardware name: IBM 3850 M2 / x3950 M2 -[72335LG]-
Modules linked in: autofs4 sunrpc bridge 8021q garp stp llc bonding ipv6 dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath kvm_intel kvm uinput sg ibmaem ipmi_msghandler hwmon iTCO_wdt iTCO_vendor_support bnx2 ext3 jbd mbcache sd_mod crc_t10dif qla2xxx scsi_transport_fc scsi_tgt megaraid_sas ata_generic pata_acpi ata_piix radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mod scsi_dh_rdac [last unloaded: speedstep_lib]
Pid: 4080, comm: qlremote Not tainted 2.6.32-71.29.1.el6.x86_64 #1
Call Trace:
 [<ffffffff8106b947>] warn_slowpath_common+0x87/0xc0
 [<ffffffff8106b99a>] warn_slowpath_null+0x1a/0x20
 [<ffffffffa016eac1>] fc_bsg_jobdone+0xb1/0xd0 [scsi_transport_fc]
 [<ffffffffa01b252a>] qla24xx_bsg_request+0x9a/0x1934 [qla2xxx]
 [<ffffffff8107e7d6>] ? mod_timer+0x146/0x230
 [<ffffffff81247b41>] ? blk_rq_map_sg+0x81/0x2e0
 [<ffffffffa017182c>] fc_bsg_request_handler+0x43c/0x480 [scsi_transport_fc]
 [<ffffffffa017188e>] fc_bsg_host_handler+0x1e/0x20 [scsi_transport_fc]
 [<ffffffff81240bc2>] __generic_unplug_device+0x32/0x40
 [<ffffffff81246fed>] blk_execute_rq_nowait+0x6d/0xc0
 [<ffffffff812470c4>] blk_execute_rq+0x84/0xf0
 [<ffffffff8124c7be>] ? bsg_map_hdr+0x1de/0x350
 [<ffffffff8124cb22>] bsg_ioctl+0x1f2/0x250
 [<ffffffff8124d116>] ? bsg_open+0x2c6/0x350
 [<ffffffff811579bc>] ? __kmalloc+0x20c/0x220
 [<ffffffff812003f9>] ? security_ipc_permission+0x19/0x20
 [<ffffffff8117fdf2>] vfs_ioctl+0x22/0xa0
 [<ffffffff8117ff94>] do_vfs_ioctl+0x84/0x580
 [<ffffffff8116aa37>] ? nameidata_to_filp+0x57/0x70
 [<ffffffff8117e088>] ? do_filp_open+0x708/0xd50
 [<ffffffff81180511>] sys_ioctl+0x81/0xa0
 [<ffffffff811bcd06>] sg_ioctl_trans+0x56/0x320
 [<ffffffff8117a111>] ? path_put+0x31/0x40
 [<ffffffff811be006>] compat_sys_ioctl+0x1a6/0x510
 [<ffffffff810d4372>] ? audit_syscall_entry+0x272/0x2a0
 [<ffffffff8104cb50>] sysenter_dispatch+0x7/0x2e
---[ end trace 1efee2af2148ce98 ]---
Steps To Reproduceanytime after boot, and sometimes during work
Additional Informationand reporting second and other traces many times:
WARNING: at drivers/scsi/scsi_transport_fc.c:3503 fc_bsg_jobdone+0xb1/0xd0 [scsi_transport_fc]() (Tainted: G W ---------------- )
Hardware name: IBM 3850 M2 / x3950 M2 -[72335LG]-
Modules linked in: autofs4 sunrpc bridge 8021q garp stp llc bonding ipv6 dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath kvm_intel kvm uinput sg ibmaem ipmi_msghandler hwmon iTCO_wdt iTCO_vendor_support bnx2 ext3 jbd mbcache sd_mod crc_t10dif qla2xxx scsi_transport_fc scsi_tgt megaraid_sas ata_generic pata_acpi ata_piix radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mod scsi_dh_rdac [last unloaded: speedstep_lib]
Pid: 4080, comm: qlremote Tainted: G W ---------------- 2.6.32-71.29.1.el6.x86_64 #1
Call Trace:
 [<ffffffff8106b947>] warn_slowpath_common+0x87/0xc0
 [<ffffffff8106b99a>] warn_slowpath_null+0x1a/0x20
 [<ffffffffa016eac1>] fc_bsg_jobdone+0xb1/0xd0 [scsi_transport_fc]
 [<ffffffffa01b252a>] qla24xx_bsg_request+0x9a/0x1934 [qla2xxx]
 [<ffffffff8107e7d6>] ? mod_timer+0x146/0x230
 [<ffffffff81247b41>] ? blk_rq_map_sg+0x81/0x2e0
 [<ffffffffa017182c>] fc_bsg_request_handler+0x43c/0x480 [scsi_transport_fc]
 [<ffffffffa017188e>] fc_bsg_host_handler+0x1e/0x20 [scsi_transport_fc]
 [<ffffffff81240bc2>] __generic_unplug_device+0x32/0x40
 [<ffffffff81246fed>] blk_execute_rq_nowait+0x6d/0xc0
 [<ffffffff812470c4>] blk_execute_rq+0x84/0xf0
 [<ffffffff8124c7be>] ? bsg_map_hdr+0x1de/0x350
 [<ffffffff8124cb22>] bsg_ioctl+0x1f2/0x250
 [<ffffffff8124d116>] ? bsg_open+0x2c6/0x350
 [<ffffffff812003f9>] ? security_ipc_permission+0x19/0x20
 [<ffffffff8117fdf2>] vfs_ioctl+0x22/0xa0
 [<ffffffff8117ff94>] do_vfs_ioctl+0x84/0x580
 [<ffffffff8116aa37>] ? nameidata_to_filp+0x57/0x70
 [<ffffffff8117e088>] ? do_filp_open+0x708/0xd50
 [<ffffffff81180511>] sys_ioctl+0x81/0xa0
 [<ffffffff811bcd06>] sg_ioctl_trans+0x56/0x320
 [<ffffffff8117a111>] ? path_put+0x31/0x40
 [<ffffffff811be006>] compat_sys_ioctl+0x1a6/0x510
 [<ffffffff810d4372>] ? audit_syscall_entry+0x272/0x2a0
 [<ffffffff8104cb50>] sysenter_dispatch+0x7/0x2e
---[ end trace 1efee2af2148ce99 ]---
TagsNo tags attached.

Activities

sigru

sigru

2011-11-09 01:05

reporter  

20111109bugreport_full.txt (65,561 bytes)
[root@xen3 ~]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.29.1.el6.x86_64 (mockbuild@c6b5.bsys.dev.centos.org) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Mon Jun 27 19:49:27 BST 2011
Command line: ro root=/dev/VolGroup00/LogVol00 rdloaddriver=scsi_dh_rdac irqpoll crashkernel=auto SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff4ac80 (usable)
 BIOS-e820: 000000007ff4ac80 - 000000007ff57b40 (ACPI data)
 BIOS-e820: 000000007ff57b40 - 0000000080000000 (reserved)
 BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000001480000000 (usable)
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1480000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0100000000 mask FF00000000 write-back
  2 base 0200000000 mask FE00000000 write-back
  3 base 0400000000 mask FC00000000 write-back
  4 base 0800000000 mask F800000000 write-back
  5 base 1000000000 mask F000000000 write-back
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7ff4a max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007ff4a000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007ff4a000 page 4k
kernel direct mapping tables up to 7ff4a000 @ 8000-c000
init_memory_mapping: 0000000100000000-0000001480000000
 0100000000 - 1480000000 page 2M
kernel direct mapping tables up to 1480000000 @ a000-5d000
RAMDISK: 37384000 - 37fefa84
ACPI: RSDP 000000000009bde0 00014 (v00 M   IB)
ACPI: RSDT 000000007ff57ac0 00044 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: FACP 000000007ff57900 000F4 (v03 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: DSDT 000000007ff4ac80 021B5 (v01 IBM    EXA01ZEU 00001000 INTL 20060707)
ACPI: FACS 000000007ff53580 00040
ACPI: APIC 000000007ff57700 001D4 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: SRAT 000000007ff57500 00200 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: HPET 000000007ff574c0 00038 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: TCPA 000000007ff57440 00064 (v02 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: MCFG 000000007ff57400 0003C (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: ERST 000000007ff535c0 00230 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: SSDT 000000007ff4ce40 05DD2 (v01 IBM    VIGSSDT0 00001000 INTL 20060707)
ACPI: Local APIC address 0xfee00000
IBM Summit detected, will use apic physical
Setting APIC routing to physical flat.
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 32 -> Node 0
SRAT: PXM 0 -> APIC 16 -> Node 0
SRAT: PXM 0 -> APIC 56 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 33 -> Node 0
SRAT: PXM 0 -> APIC 17 -> Node 0
SRAT: PXM 0 -> APIC 57 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 34 -> Node 0
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 0 -> APIC 58 -> Node 0
SRAT: PXM 0 -> APIC 11 -> Node 0
SRAT: PXM 0 -> APIC 35 -> Node 0
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 0 -> APIC 59 -> Node 0
SRAT: PXM 0 -> APIC 108 -> Node 0
SRAT: PXM 0 -> APIC 68 -> Node 0
SRAT: PXM 0 -> APIC 84 -> Node 0
SRAT: PXM 0 -> APIC 124 -> Node 0
SRAT: PXM 0 -> APIC 109 -> Node 0
SRAT: PXM 0 -> APIC 69 -> Node 0
SRAT: PXM 0 -> APIC 85 -> Node 0
SRAT: PXM 0 -> APIC 125 -> Node 0
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-1480000000
NUMA: Using 32 for the hash shift.
Bootmem setup node 0 0000000000000000-0000001480000000
  NODE_DATA [0000000000058000 - 000000000008bfff]
  bootmap [0000000000100000 -  000000000038ffff] pages 290
(8 early reservations) ==> bootmem [0000000000 - 1480000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0001ca0ff8]    TEXT DATA BSS ==> [0001000000 - 0001ca0ff8]
  #3 [0037384000 - 0037fefa84]          RAMDISK ==> [0037384000 - 0037fefa84]
  #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
  #5 [0001ca1000 - 0001ca1390]              BRK ==> [0001ca1000 - 0001ca1390]
  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
  #7 [000000a000 - 0000058000]          PGTABLE ==> [000000a000 - 0000058000]
found SMP MP-table at [ffff88000009bd40] 9bd40
Reserving 129MB of memory at 32MB for crashkernel (System RAM: 83968MB)
 [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800371fffff] on node 0
 [ffffea0010800000-ffffea003fffffff] PMD -> [ffff880038000000-ffff8800677fffff] on node 0
 [ffffea0040000000-ffffea0047bfffff] PMD -> [ffff880067a00000-ffff88006f5fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x01480000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x0000009b
    0: 0x00000100 -> 0x0007ff4a
    0: 0x00100000 -> 0x01480000
On node 0 totalpages: 20971236
  DMA zone: 56 pages used for memmap
  DMA zone: 183 pages reserved
  DMA zone: 3755 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 505730 pages, LIFO batch:31
  Normal zone: 279552 pages used for memmap
  Normal zone: 20167680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
IBM Summit detected, will use apic physical
Setting APIC routing to physical flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x38] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x39] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x3a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x3b] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x6c] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x44] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x54] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x7c] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x6d] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x45] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x55] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x7d] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 15, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x10] address[0xfecff000] gsi_base[24])
IOAPIC[1]: apic_id 16, version 17, address 0xfecff000, GSI 24-26
ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[27])
IOAPIC[2]: apic_id 14, version 17, address 0xfec01000, GSI 27-62
ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[63])
IOAPIC[3]: apic_id 13, version 17, address 0xfec02000, GSI 63-98
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ8 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10142201 base: 0xfde84000
SMP: Allowing 24 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 99
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007ff4a000 - 000000007ff4b000
PM: Registered nosave memory: 000000007ff4b000 - 000000007ff57000
PM: Registered nosave memory: 000000007ff57000 - 000000007ff58000
PM: Registered nosave memory: 000000007ff58000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at 80000000 (gap: 80000000:50000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88006f600000 s95064 r8192 d23720 u131072
pcpu-alloc: s95064 r8192 d23720 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- -- 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 20677165
Policy zone: Normal
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rdloaddriver=scsi_dh_rdac irqpoll crashkernel=129M@0M SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 82510388k/85983232k available (4939k kernel code, 2098288k absent, 1374556k reserved, 3931k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1875
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 838860800 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2398.852 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4797.70 BogoMIPS (lpj=2398852)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20293 entries in 80 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           E7450  @ 2.40GHz stepping 01
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 Ok.
Brought up 24 CPUs
Total of 24 processors activated (115130.90 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 46
PCI: MCFG area at d0000000 reserved in E820
PCI: Using MMCONFIG at d0000000 - d2efffff
PCI: Using configuration type 1 for base access
PCI: IBM System x3950 detected, can skip ISA alignment
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [VP0E] (0000:00)
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x3000-0x301f]
pci 0000:00:1d.1: reg 20 io port: [0x3100-0x311f]
pci 0000:00:1d.2: reg 20 io port: [0x3200-0x321f]
pci 0000:00:1d.3: reg 20 io port: [0x3300-0x331f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4100000-0xf41003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0580-05ff claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0c00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0560 (mask 007f)
pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.2: reg 20 io port: [0x700-0x70f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:02:00.0: reg 10 64bit mmio: [0xf0000000-0xf1ffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 64bit mmio: [0xf2000000-0xf3ffffff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0xf0000000-0xf3ffffff]
pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xf4020000-0xf402ffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4000000-0xf40fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe8000000-0xefffffff]
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP0E._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Root Bridge [VP00] (0000:03)
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:04:00.0: reg 10 64bit mmio: [0xf4400000-0xf443ffff]
pci 0000:04:00.0: reg 18 io port: [0x3600-0x36ff]
pci 0000:04:00.0: reg 1c 64bit mmio: [0xf4440000-0xf447ffff]
pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:03:00.0: transparent bridge
pci_bus 0000:03: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP00._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.VP00.P2PB._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Root Bridge [VP01] (0000:17)
pci 0000:17:00.0: supports D1 D2
pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:17:00.0: PME# disabled
pci 0000:17:00.0: transparent bridge
pci_bus 0000:17: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.VP01.P2PB._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Root Bridge [VP02] (0000:1d)
pci 0000:1d:00.0: supports D1 D2
pci 0000:1d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:1d:00.0: PME# disabled
pci 0000:1d:00.0: transparent bridge
pci_bus 0000:1d: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.VP02.P2PB._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Root Bridge [VP03] (0000:23)
pci 0000:23:00.0: supports D1 D2
pci 0000:23:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:23:00.0: PME# disabled
pci 0000:23:00.0: transparent bridge
pci_bus 0000:23: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.VP03.P2PB._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Root Bridge [VP04] (0000:29)
pci 0000:29:00.0: supports D1 D2
pci 0000:29:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:29:00.0: PME# disabled
pci 0000:29:00.0: transparent bridge
pci_bus 0000:29: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.VP04.P2PB._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Root Bridge [VP05] (0000:05)
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: transparent bridge
pci_bus 0000:05: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.VP05.P2PB._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Root Bridge [VP06] (0000:0b)
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:0c:00.0: reg 10 io port: [0x3400-0x34ff]
pci 0000:0c:00.0: reg 14 64bit mmio: [0xf4240000-0xf4243fff]
pci 0000:0c:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:0b:00.0: transparent bridge
pci_bus 0000:0b: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.VP06.P2PB._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Root Bridge [VP07] (0000:11)
pci 0000:11:00.0: supports D1 D2
pci 0000:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:11:00.0: PME# disabled
pci 0000:12:00.0: reg 10 io port: [0x3500-0x35ff]
pci 0000:12:00.0: reg 14 64bit mmio: [0xf4340000-0xf4343fff]
pci 0000:12:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:11:00.0: transparent bridge
pci_bus 0000:11: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.VP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.VP07.P2PB._PRT]
Firmware did not grant requested _OSC control
Unable to assume PCIe control: Disabling ASPM
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfde84000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 3.707069 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: mem resource (0x400-0x4ff) overlaps 0000:01:00.0 BAR 6 (0x0-0x1ffff), disabling
pnp 00:09: mem resource (0x400-0x4ff) overlaps 0000:04:00.0 BAR 6 (0x0-0x1ffff), disabling
pnp 00:09: mem resource (0x400-0x4ff) overlaps 0000:0c:00.0 BAR 6 (0x0-0x3ffff), disabling
pnp 00:09: mem resource (0x400-0x4ff) overlaps 0000:12:00.0 BAR 6 (0x0-0x3ffff), disabling
pnp: PnP ACPI: found 21 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x400-0x43f has been reserved
system 00:07: ioport range 0x440-0x45f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x540-0x55f has been reserved
system 00:07: ioport range 0x560-0x57f has been reserved
system 00:07: ioport range 0x580-0x5ff has been reserved
system 00:07: ioport range 0xc00-0xca7 has been reserved
system 00:07: ioport range 0xcb0-0xcde has been reserved
system 00:07: iomem range 0xfde86000-0xfdf05fff has been reserved
system 00:07: iomem range 0xfda00000-0xfdbfffff has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:0b: iomem range 0xfde84000-0xfde843ff has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   bridge window [io  disabled]
pci 0000:00:1c.0:   bridge window [0xf0000000-0xf3ffffff]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   bridge window [0x2000-0x2fff]
pci 0000:00:1e.0:   bridge window [0xf4000000-0xf40fffff]
pci 0000:00:1e.0:   bridge window [0xe8000000-0xefffffff]
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
pci 0000:03:00.0:   bridge window [io  disabled]
pci 0000:03:00.0:   bridge window [mem disabled]
pci 0000:03:00.0:   bridge window [0x80100000-0x801fffff]
pci 0000:03:00.0: setting latency timer to 64
pci 0000:17:00.0: PCI bridge to [bus 18-1c]
pci 0000:17:00.0: PCI bridge, secondary bus 0000:18
pci 0000:17:00.0:   bridge window [io  disabled]
pci 0000:17:00.0:   bridge window [mem disabled]
pci 0000:17:00.0:   bridge window [mem pref disabled]
pci 0000:17:00.0: setting latency timer to 64
pci 0000:1d:00.0: PCI bridge to [bus 1e-22]
pci 0000:1d:00.0: PCI bridge, secondary bus 0000:1e
pci 0000:1d:00.0:   bridge window [io  disabled]
pci 0000:1d:00.0:   bridge window [mem disabled]
pci 0000:1d:00.0:   bridge window [mem pref disabled]
pci 0000:1d:00.0: setting latency timer to 64
pci 0000:23:00.0: PCI bridge to [bus 24-28]
pci 0000:23:00.0: PCI bridge, secondary bus 0000:24
pci 0000:23:00.0:   bridge window [io  disabled]
pci 0000:23:00.0:   bridge window [mem disabled]
pci 0000:23:00.0:   bridge window [mem pref disabled]
pci 0000:23:00.0: setting latency timer to 64
pci 0000:29:00.0: PCI bridge to [bus 2a-2e]
pci 0000:29:00.0: PCI bridge, secondary bus 0000:2a
pci 0000:29:00.0:   bridge window [io  disabled]
pci 0000:29:00.0:   bridge window [mem disabled]
pci 0000:29:00.0:   bridge window [mem pref disabled]
pci 0000:29:00.0: setting latency timer to 64
pci 0000:05:00.0: PCI bridge to [bus 06-0a]
pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
pci 0000:05:00.0:   bridge window [io  disabled]
pci 0000:05:00.0:   bridge window [mem disabled]
pci 0000:05:00.0:   bridge window [mem pref disabled]
pci 0000:05:00.0: setting latency timer to 64
pci 0000:0b:00.0: PCI bridge to [bus 0c-10]
pci 0000:0b:00.0: PCI bridge, secondary bus 0000:0c
pci 0000:0b:00.0:   bridge window [0x1000-0x1fff]
pci 0000:0b:00.0:   bridge window [0x80200000-0x803fffff]
pci 0000:0b:00.0:   bridge window [0x80400000-0x805fffff]
pci 0000:0b:00.0: setting latency timer to 64
pci 0000:11:00.0: PCI bridge to [bus 12-16]
pci 0000:11:00.0: PCI bridge, secondary bus 0000:12
pci 0000:11:00.0:   bridge window [0x4000-0x4fff]
pci 0000:11:00.0:   bridge window [0x80600000-0x807fffff]
pci 0000:11:00.0:   bridge window [0x80800000-0x809fffff]
pci 0000:11:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf3ffffff]
pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf40fffff]
pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 0 io:  [0x00-0xffff]
pci_bus 0000:03: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:04: resource 2 pref mem [0x80100000-0x801fffff]
pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:17: resource 0 io:  [0x00-0xffff]
pci_bus 0000:17: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:18: resource 3 io:  [0x00-0xffff]
pci_bus 0000:18: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:1d: resource 0 io:  [0x00-0xffff]
pci_bus 0000:1d: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:1e: resource 3 io:  [0x00-0xffff]
pci_bus 0000:1e: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:23: resource 0 io:  [0x00-0xffff]
pci_bus 0000:23: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:24: resource 3 io:  [0x00-0xffff]
pci_bus 0000:24: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:29: resource 0 io:  [0x00-0xffff]
pci_bus 0000:29: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:2a: resource 3 io:  [0x00-0xffff]
pci_bus 0000:2a: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:05: resource 0 io:  [0x00-0xffff]
pci_bus 0000:05: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:0b: resource 0 io:  [0x00-0xffff]
pci_bus 0000:0b: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:0c: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:0c: resource 1 mem: [0x80200000-0x803fffff]
pci_bus 0000:0c: resource 2 pref mem [0x80400000-0x805fffff]
pci_bus 0000:0c: resource 3 io:  [0x00-0xffff]
pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:11: resource 0 io:  [0x00-0xffff]
pci_bus 0000:11: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:12: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:12: resource 1 mem: [0x80600000-0x807fffff]
pci_bus 0000:12: resource 2 pref mem [0x80800000-0x809fffff]
pci_bus 0000:12: resource 3 io:  [0x00-0xffff]
pci_bus 0000:12: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 12718k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1320799673.249:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 965331713A640F69
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
  alloc irq_desc for 99 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:1c.0: irq 99 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
processor LNXCPU:10: registered as cooling_device16
processor LNXCPU:11: registered as cooling_device17
processor LNXCPU:12: registered as cooling_device18
processor LNXCPU:13: registered as cooling_device19
processor LNXCPU:14: registered as cooling_device20
processor LNXCPU:15: registered as cooling_device21
processor LNXCPU:16: registered as cooling_device22
processor LNXCPU:17: registered as cooling_device23
Hotplug Mem Device 
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:0a: 1.2 TPM (device-id 0xFE, rev-id 70)
crash memory driver: version 1.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 23 on node 0
  alloc kstat_irqs on node 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
  alloc irq_desc for 17 on node 0
  alloc kstat_irqs on node 0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003100
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
  alloc irq_desc for 18 on node 0
  alloc kstat_irqs on node 0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003200
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
  alloc irq_desc for 19 on node 0
  alloc kstat_irqs on node 0
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003300
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-71.29.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Can't read CTR while initializing i8042.
i8042: probe of i8042 failed with error -5
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 242 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2011-11-09 00:47:56 UTC (1320799676)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7184k
rdac: device handler registered
dracut: dracut-004-32.el6
usb 2-1: new low speed USB device using uhci_hcd and address 2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
  alloc irq_desc for 16 on node 0
  alloc kstat_irqs on node 0
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] initializing kernel modesetting (RV100 0x1002:0x515E).
[drm] register mmio base: 0xF4020000
[drm] register mmio size: 65536
radeon 0000:01:00.0: VRAM: 64M 0xE8000000 - 0xEBFFFFFF (16M used)
radeon 0000:01:00.0: GTT: 512M 0xC8000000 - 0xE7FFFFFF
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone  kernel: Available graphics memory: 41262164 kiB.
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
usb 2-1: New USB device found, idVendor=0624, idProduct=0366
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: IBM 31R3132
usb 2-1: Manufacturer: Avocent
usb 2-1: configuration #1 chosen from 1 choice
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000C8000000
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] No valid Ext TMDS info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm]   DVI-D
[drm]   HPD2
[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm]   Encoders:
[drm]     DFP2: INTERNAL_DVO1
input: Avocent IBM 31R3132 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
generic-usb 0003:0624:0366.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent IBM 31R3132] on usb-0000:00:1d.0-1/input0
input: Avocent IBM 31R3132 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
generic-usb 0003:0624:0366.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent IBM 31R3132] on usb-0000:00:1d.0-1/input1
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 786432
[drm] fb depth is 8
[drm]    pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=04b3, idProduct=4001
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: IBM RSA2
usb 4-1: Manufacturer: IBM
usb 4-1: SerialNumber: e41f1332d1c3
usb 4-1: configuration #1 chosen from 1 choice
[drm:radeon_i2c_sw_put_byte] *ERROR* i2c 0x08 0x30 write failed
input: IBM IBM RSA2 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input4
generic-usb 0003:04B3:4001.0003: input,hidraw2: USB HID v1.10 Keyboard [IBM IBM RSA2] on usb-0000:00:1d.2-1/input0
input: IBM IBM RSA2 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input5
generic-usb 0003:04B3:4001.0004: input,hidraw3: USB HID v1.10 Mouse [IBM IBM RSA2] on usb-0000:00:1d.2-1/input1
[drm:radeon_i2c_sw_put_byte] *ERROR* i2c 0x09 0x00 write failed
[drm:radeon_i2c_sw_put_byte] *ERROR* i2c 0x0a 0x90 write failed
[drm:radeon_i2c_sw_put_byte] *ERROR* i2c 0x0c 0x89 write failed
[drm:radeon_i2c_sw_put_byte] *ERROR* i2c 0x08 0x3b write failed
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.1.0 20080528 for 0000:01:00.0 on minor 0
dracut: Starting plymouth daemon
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: can't derive routing for PCI INT A
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x700 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x708 irq 15
megasas: 00.00.04.28-RH1 Tue. Mar. 09 14:13:02 EST 2010
megasas: 0x1000:0x0060:0x1014:0x0363: bus 4:slot 0:func 0
  alloc irq_desc for 46 on node 0
  alloc kstat_irqs on node 0
megaraid_sas 0000:04:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
megaraid_sas 0000:04:00.0: setting latency timer to 64
megasas: FW now in Ready state
megasas_init_mfi: fw_support_ieee=0
scsi2 : LSI SAS based MegaRAID driver
scsi 2:0:0:0: Enclosure         IBM      SAS SES-2 DEVICE 2.06 PQ: 0 ANSI: 3
QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
scsi 2:0:1:0: Direct-Access     IBM-ESXS CBRCA146C3ETS0 N C610 PQ: 0 ANSI: 6
scsi 2:0:2:0: Direct-Access     IBM-ESXS CBRCA146C3ETS0 N C610 PQ: 0 ANSI: 6
  alloc irq_desc for 44 on node 0
  alloc kstat_irqs on node 0
qla2xxx 0000:0c:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
qla2xxx 0000:0c:00.0: Found an ISP2532, irq 44, iobase 0xffffc9000fe48000
  alloc irq_desc for 100 on node 0
  alloc kstat_irqs on node 0
qla2xxx 0000:0c:00.0: irq 100 for MSI/MSI-X
  alloc irq_desc for 101 on node 0
  alloc kstat_irqs on node 0
qla2xxx 0000:0c:00.0: irq 101 for MSI/MSI-X
qla2xxx 0000:0c:00.0: Configuring PCI space...
qla2xxx 0000:0c:00.0: setting latency timer to 64
scsi 2:2:0:0: Direct-Access     IBM      ServeRAID-MR10k  1.40 PQ: 0 ANSI: 5
qla2xxx 0000:0c:00.0: Configure NVRAM parameters...
qla2xxx 0000:0c:00.0: Verifying loaded RISC code...
qla2xxx 0000:0c:00.0: firmware: requesting ql2500_fw.bin
qla2xxx 0000:0c:00.0: Firmware image unavailable.
qla2xxx 0000:0c:00.0: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/.
qla2xxx 0000:0c:00.0: FW: Loading from flash (20000)...
qla2xxx 0000:0c:00.0: Allocated (64 KB) for FCE...
qla2xxx 0000:0c:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:0c:00.0: Allocated (1350 KB) for firmware dump...
qla2xxx 0000:0c:00.0: Unable to read FCP priority data.
scsi3 : qla2xxx
qla2xxx 0000:0c:00.0: 
 QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
  QLogic QLE2560 - QLogic 8Gb FC Single-port HBA for System x
  ISP2532: PCIe (2.5GT/s x8) @ 0000:0c:00.0 hdma+, host#=3, fw=5.03.06 (80)
  alloc irq_desc for 45 on node 0
  alloc kstat_irqs on node 0
qla2xxx 0000:12:00.0: PCI INT A -> GSI 45 (level, low) -> IRQ 45
qla2xxx 0000:12:00.0: Found an ISP2532, irq 45, iobase 0xffffc9000fe32000
  alloc irq_desc for 102 on node 0
  alloc kstat_irqs on node 0
qla2xxx 0000:12:00.0: irq 102 for MSI/MSI-X
  alloc irq_desc for 103 on node 0
  alloc kstat_irqs on node 0
qla2xxx 0000:12:00.0: irq 103 for MSI/MSI-X
qla2xxx 0000:12:00.0: Configuring PCI space...
qla2xxx 0000:12:00.0: setting latency timer to 64
qla2xxx 0000:12:00.0: Configure NVRAM parameters...
qla2xxx 0000:12:00.0: Verifying loaded RISC code...
qla2xxx 0000:12:00.0: firmware: requesting ql2500_fw.bin
qla2xxx 0000:12:00.0: Firmware image unavailable.
qla2xxx 0000:12:00.0: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/.
qla2xxx 0000:12:00.0: FW: Loading from flash (20000)...
qla2xxx 0000:0c:00.0: LIP reset occurred (f700).
qla2xxx 0000:0c:00.0: LIP occurred (f700).
qla2xxx 0000:0c:00.0: LIP reset occurred (f7f7).
qla2xxx 0000:0c:00.0: LOOP UP detected (8 Gbps).
qla2xxx 0000:12:00.0: Allocated (64 KB) for FCE...
qla2xxx 0000:12:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:12:00.0: Allocated (1350 KB) for firmware dump...
qla2xxx 0000:12:00.0: Unable to read FCP priority data.
scsi4 : qla2xxx
qla2xxx 0000:12:00.0: 
 QLogic Fibre Channel HBA Driver: 8.03.01.05.06.0-k8
  QLogic QLE2560 - QLogic 8Gb FC Single-port HBA for System x
  ISP2532: PCIe (2.5GT/s x8) @ 0000:12:00.0 hdma+, host#=4, fw=5.03.06 (80)
sd 2:2:0:0: [sda] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 2:2:0:0: [sda] Write Protect is off
sd 2:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 2:2:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 2:2:0:0: [sda] Attached SCSI disk
scsi: waiting for bus probes to complete ...
scsi: waiting for bus probes to complete ...
qla2xxx 0000:12:00.0: LIP reset occurred (f700).
qla2xxx 0000:12:00.0: LIP occurred (f700).
qla2xxx 0000:12:00.0: LIP reset occurred (f7f7).
qla2xxx 0000:12:00.0: LOOP UP detected (8 Gbps).
scsi 3:0:0:0: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 3:0:0:0: rdac: LUN 0 (unowned)
sd 3:0:0:0: [sdb] 16105085080 512-byte logical blocks: (8.24 TB/7.49 TiB)
scsi 3:0:0:1: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
dracut: Scanning devices sda2  for LVM volume groups 
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 77 00 10 08
scsi 3:0:0:1: rdac: LUN 1 (unowned)
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 3:0:0:1: [sdc] 31239569408 512-byte logical blocks: (15.9 TB/14.5 TiB)
scsi 3:0:0:31: Direct-Access     IBM      Universal Xport  0914 PQ: 0 ANSI: 5
 sdb:Dev sdb: unable to read RDB block 0
 unable to read partition table
sd 3:0:0:1: [sdc] Write Protect is off
sd 3:0:0:1: [sdc] Mode Sense: 77 00 10 08
sd 3:0:0:1: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 3:0:0:0: [sdb] Attached SCSI disk
 sdc:Dev sdc: unable to read RDB block 0
 unable to read partition table
dracut: Reading all physical volumes. This may take a while...
sd 3:0:0:1: [sdc] Attached SCSI disk
dracut: Found volume group "VolGroup00" using metadata type lvm2
scsi 4:0:0:0: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 4:0:0:0: rdac: LUN 0 (owned)
sd 4:0:0:0: [sdd] 16105085080 512-byte logical blocks: (8.24 TB/7.49 TiB)
scsi 4:0:0:1: Direct-Access     IBM      1815      FAStT  0914 PQ: 0 ANSI: 5
scsi 4:0:0:1: rdac: LUN 1 (owned)
scsi 4:0:0:31: Direct-Access     IBM      Universal Xport  0914 PQ: 0 ANSI: 5
sd 4:0:0:1: [sde] 31239569408 512-byte logical blocks: (15.9 TB/14.5 TiB)
sd 4:0:0:1: [sde] Write Protect is off
sd 4:0:0:1: [sde] Mode Sense: 77 00 10 08
sd 4:0:0:1: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sde: unknown partition table
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:1: [sde] Attached SCSI disk
sd 4:0:0:0: [sdd] Mode Sense: 77 00 10 08
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sdd:
dracut: 2 logical volume(s) in volume group "VolGroup00" now active
 unknown partition table
sd 4:0:0:0: [sdd] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
dracut: Mounted root filesystem /dev/mapper/VolGroup00-LogVol00
dracut: Loading SELinux policy
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1320799683.169:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead: starting
udev: starting version 147
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8-j15 (Feb 15, 2010)
bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f0000000, IRQ 16, node addr e4:1f:13:1e:ba:f8
bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 17, node addr e4:1f:13:1e:ba:fa
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
ipmi message handler version 39.2
sd 2:2:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:1: Attached scsi generic sg2 type 0
scsi 3:0:0:31: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:1: Attached scsi generic sg5 type 0
scsi 4:0:0:31: Attached scsi generic sg6 type 0
device-mapper: multipath: version 1.1.1 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 70385656k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:70385656k 
microcode: CPU0 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU1 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU2 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU3 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU4 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU5 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU6 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU7 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU8 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU9 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU10 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU11 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU12 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU13 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU14 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU15 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU16 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU17 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU18 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU19 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU20 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU21 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU22 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
microcode: CPU23 sig=0x106d1, pf=0x8, revision=0x29
platform microcode: firmware: requesting intel-ucode/06-1d-01
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
IPv6: Loaded, but administratively disabled, reboot required to enable
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
bonding: MII link monitoring set to 100 ms
bonding: bond0: Adding slave eth0.
  alloc irq_desc for 104 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 104 for MSI/MSI-X
  alloc irq_desc for 105 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 105 for MSI/MSI-X
  alloc irq_desc for 106 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 106 for MSI/MSI-X
  alloc irq_desc for 107 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 107 for MSI/MSI-X
  alloc irq_desc for 108 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 108 for MSI/MSI-X
  alloc irq_desc for 109 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 109 for MSI/MSI-X
  alloc irq_desc for 110 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 110 for MSI/MSI-X
  alloc irq_desc for 111 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 111 for MSI/MSI-X
  alloc irq_desc for 112 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.0: irq 112 for MSI/MSI-X
bnx2: eth0: using MSIX
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bonding: bond0: Adding slave eth1.
  alloc irq_desc for 113 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 113 for MSI/MSI-X
  alloc irq_desc for 114 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 114 for MSI/MSI-X
  alloc irq_desc for 115 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 115 for MSI/MSI-X
  alloc irq_desc for 116 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 116 for MSI/MSI-X
  alloc irq_desc for 117 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 117 for MSI/MSI-X
  alloc irq_desc for 118 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 118 for MSI/MSI-X
  alloc irq_desc for 119 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 119 for MSI/MSI-X
  alloc irq_desc for 120 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 120 for MSI/MSI-X
  alloc irq_desc for 121 on node 0
  alloc kstat_irqs on node 0
bnx2 0000:02:00.1: irq 121 for MSI/MSI-X
bnx2: eth1: using MSIX
bonding: bond0: enslaving eth1 as a backup interface with a down link.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
8021q: adding VLAN 0 to HW filter on device bond0
Bridge firewalling registered
device bond0.100 entered promiscuous mode
device bond0 entered promiscuous mode
device bond0.101 entered promiscuous mode
device bond0.200 entered promiscuous mode
device bond0.208 entered promiscuous mode
device bond0.300 entered promiscuous mode
device bond0.301 entered promiscuous mode
device bond0.360 entered promiscuous mode
device bond0.98 entered promiscuous mode
device bond0.99 entered promiscuous mode
vlan98: port 1(bond0.98) entering learning state
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: making interface eth0 the new active one.
device eth0 entered promiscuous mode
bonding: bond0: first active interface up!
bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth1.
vlan99: port 1(bond0.99) entering learning state
vlan100: port 1(bond0.100) entering learning state
vlan101: port 1(bond0.101) entering learning state
vlan98: port 1(bond0.98) entering forwarding state
vlan200: port 1(bond0.200) entering learning state
vlan208: port 1(bond0.208) entering learning state
vlan99: port 1(bond0.99) entering forwarding state
vlan300: port 1(bond0.300) entering learning state
vlan100: port 1(bond0.100) entering forwarding state
vlan301: port 1(bond0.301) entering learning state
vlan101: port 1(bond0.101) entering forwarding state
vlan360: port 1(bond0.360) entering learning state
vlan200: port 1(bond0.200) entering forwarding state
vlan208: port 1(bond0.208) entering forwarding state
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
vlan300: port 1(bond0.300) entering forwarding state
------------[ cut here ]------------
WARNING: at drivers/scsi/scsi_transport_fc.c:3503 fc_bsg_jobdone+0xb1/0xd0 [scsi_transport_fc]() (Not tainted)
Hardware name: IBM 3850 M2 / x3950 M2 -[72335LG]-
Modules linked in: autofs4 sunrpc bridge 8021q garp stp llc bonding ipv6 dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath kvm_intel kvm uinput sg ibmaem ipmi_msghandler hwmon iTCO_wdt iTCO_vendor_support bnx2 ext3 jbd mbcache sd_mod crc_t10dif qla2xxx scsi_transport_fc scsi_tgt megaraid_sas ata_generic pata_acpi ata_piix radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mod scsi_dh_rdac [last unloaded: speedstep_lib]
Pid: 4080, comm: qlremote Not tainted 2.6.32-71.29.1.el6.x86_64 #1
Call Trace:
 [<ffffffff8106b947>] warn_slowpath_common+0x87/0xc0
 [<ffffffff8106b99a>] warn_slowpath_null+0x1a/0x20
 [<ffffffffa016eac1>] fc_bsg_jobdone+0xb1/0xd0 [scsi_transport_fc]
 [<ffffffffa01b252a>] qla24xx_bsg_request+0x9a/0x1934 [qla2xxx]
 [<ffffffff8107e7d6>] ? mod_timer+0x146/0x230
 [<ffffffff81247b41>] ? blk_rq_map_sg+0x81/0x2e0
 [<ffffffffa017182c>] fc_bsg_request_handler+0x43c/0x480 [scsi_transport_fc]
 [<ffffffffa017188e>] fc_bsg_host_handler+0x1e/0x20 [scsi_transport_fc]
 [<ffffffff81240bc2>] __generic_unplug_device+0x32/0x40
 [<ffffffff81246fed>] blk_execute_rq_nowait+0x6d/0xc0
 [<ffffffff812470c4>] blk_execute_rq+0x84/0xf0
 [<ffffffff8124c7be>] ? bsg_map_hdr+0x1de/0x350
 [<ffffffff8124cb22>] bsg_ioctl+0x1f2/0x250
 [<ffffffff8124d116>] ? bsg_open+0x2c6/0x350
 [<ffffffff811579bc>] ? __kmalloc+0x20c/0x220
 [<ffffffff812003f9>] ? security_ipc_permission+0x19/0x20
 [<ffffffff8117fdf2>] vfs_ioctl+0x22/0xa0
 [<ffffffff8117ff94>] do_vfs_ioctl+0x84/0x580
 [<ffffffff8116aa37>] ? nameidata_to_filp+0x57/0x70
 [<ffffffff8117e088>] ? do_filp_open+0x708/0xd50
 [<ffffffff81180511>] sys_ioctl+0x81/0xa0
 [<ffffffff811bcd06>] sg_ioctl_trans+0x56/0x320
 [<ffffffff8117a111>] ? path_put+0x31/0x40
 [<ffffffff811be006>] compat_sys_ioctl+0x1a6/0x510
 [<ffffffff810d4372>] ? audit_syscall_entry+0x272/0x2a0
 [<ffffffff8104cb50>] sysenter_dispatch+0x7/0x2e
---[ end trace 1efee2af2148ce98 ]---
------------[ cut here ]------------
WARNING: at drivers/scsi/scsi_transport_fc.c:3503 fc_bsg_jobdone+0xb1/0xd0 [scsi_transport_fc]() (Tainted: G        W  ---------------- )
Hardware name: IBM 3850 M2 / x3950 M2 -[72335LG]-
Modules linked in: autofs4 sunrpc bridge 8021q garp stp llc bonding ipv6 dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath kvm_intel kvm uinput sg ibmaem ipmi_msghandler hwmon iTCO_wdt iTCO_vendor_support bnx2 ext3 jbd mbcache sd_mod crc_t10dif qla2xxx scsi_transport_fc scsi_tgt megaraid_sas ata_generic pata_acpi ata_piix radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mod scsi_dh_rdac [last unloaded: speedstep_lib]
Pid: 4080, comm: qlremote Tainted: G        W  ----------------  2.6.32-71.29.1.el6.x86_64 #1
Call Trace:
 [<ffffffff8106b947>] warn_slowpath_common+0x87/0xc0
 [<ffffffff8106b99a>] warn_slowpath_null+0x1a/0x20
 [<ffffffffa016eac1>] fc_bsg_jobdone+0xb1/0xd0 [scsi_transport_fc]
 [<ffffffffa01b252a>] qla24xx_bsg_request+0x9a/0x1934 [qla2xxx]
 [<ffffffff8107e7d6>] ? mod_timer+0x146/0x230
 [<ffffffff81247b41>] ? blk_rq_map_sg+0x81/0x2e0
 [<ffffffffa017182c>] fc_bsg_request_handler+0x43c/0x480 [scsi_transport_fc]
 [<ffffffffa017188e>] fc_bsg_host_handler+0x1e/0x20 [scsi_transport_fc]
 [<ffffffff81240bc2>] __generic_unplug_device+0x32/0x40
 [<ffffffff81246fed>] blk_execute_rq_nowait+0x6d/0xc0
 [<ffffffff812470c4>] blk_execute_rq+0x84/0xf0
 [<ffffffff8124c7be>] ? bsg_map_hdr+0x1de/0x350
 [<ffffffff8124cb22>] bsg_ioctl+0x1f2/0x250
 [<ffffffff8124d116>] ? bsg_open+0x2c6/0x350
 [<ffffffff812003f9>] ? security_ipc_permission+0x19/0x20
 [<ffffffff8117fdf2>] vfs_ioctl+0x22/0xa0
 [<ffffffff8117ff94>] do_vfs_ioctl+0x84/0x580
 [<ffffffff8116aa37>] ? nameidata_to_filp+0x57/0x70
 [<ffffffff8117e088>] ? do_filp_open+0x708/0xd50
 [<ffffffff81180511>] sys_ioctl+0x81/0xa0
 [<ffffffff811bcd06>] sg_ioctl_trans+0x56/0x320
 [<ffffffff8117a111>] ? path_put+0x31/0x40
 [<ffffffff811be006>] compat_sys_ioctl+0x1a6/0x510
 [<ffffffff810d4372>] ? audit_syscall_entry+0x272/0x2a0
 [<ffffffff8104cb50>] sysenter_dispatch+0x7/0x2e
---[ end trace 1efee2af2148ce99 ]---
ip_tables: (C) 2000-2006 Netfilter Core Team
virbr0: starting userspace STP failed, starting kernel STP
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
vlan301: port 1(bond0.301) entering forwarding state
Fusion MPT base driver 3.04.16
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.16
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
mpt2sas version 05.100.00.02 loaded
vlan360: port 1(bond0.360) entering forwarding state
[root@xen3 ~]# 

tru

tru

2011-11-09 09:40

administrator   ~0013741

could you try the latest kernel kernel-2.6.32-131.17.1.el6. from the CR repository?
sigru

sigru

2011-11-09 21:35

reporter   ~0013744

yes, a can. today i have do it.
sigru

sigru

2011-11-09 23:15

reporter   ~0013745

I have do it:
yum -y localinstall kernel-2.6.32-131.17.1.el6.x86_64.rpm kernel-firmware-2.6.32-131.17.1.el6.noarch.rpm
And now I cant't find this error. Good thing.
Thank you!
tru

tru

2011-11-10 07:57

administrator   ~0013747

thanks for the feedback, marking as fixed in the CR repository/6.1 version.

Issue History

Date Modified Username Field Change
2011-11-09 01:05 sigru New Issue
2011-11-09 01:05 sigru File Added: 20111109bugreport_full.txt
2011-11-09 09:40 tru Note Added: 0013741
2011-11-09 21:35 sigru Note Added: 0013744
2011-11-09 23:15 sigru Note Added: 0013745
2011-11-10 07:57 tru Note Added: 0013747
2011-11-10 07:57 tru Status new => resolved
2011-11-10 07:57 tru Resolution open => fixed