View Issue Details

IDProjectCategoryView StatusLast Update
0006247CentOS-6-OTHERpublic2013-02-09 15:08
Reporterphloks 
PrioritynormalSeverityminorReproducibilityalways
Status newResolutionopen 
PlatformPCOSCentosOS Version6.3
Product Version6.3 
Target VersionFixed in Version 
Summary0006247: DVR card not recognized properly with existing driver
DescriptionWhen attaching the following USB capture device to the PC, the chipset seems to be recognized, but numerous errors appear. I tried to find the root cause of this error, but was unable to find any solution.
I'm thinking the driver software does not work properly.
Steps To Reproducedetach / attach device
Additional Informationusb 1-7: new high speed USB device number 3 using ehci_hcd
usb 1-7: New USB device found, idVendor=0572, idProduct=58a6
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: Polaris AV Capture
usb 1-7: Manufacturer: Conexant Corporation
usb 1-7: SerialNumber: 0000000002
usb 1-7: configuration #1 chosen from 1 choice
cx231xx #1: New device Conexant Corporation Polaris AV Capture @ 480 Mbps (0572:58a6) with 6 interfaces
cx231xx #1: registering interface 1
cx231xx #1: can't change interface 4 alt no. to 3: Max. Pkt size = 0
cx231xx #1: can't change interface 5 alt no. to 1: Max. Pkt size = 0
cx231xx #1: Identified as Conexant VIDEO GRABBER (card=5)
cx231xx #1: cx231xx_dif_set_standard: setStandard to ffffffff
cx231xx #1: Changing the i2c master port to 3
cx25840 18-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #1)
cx25840 18-0044: Firmware download size changed to 16 bytes max length
cx25840 18-0044: firmware: requesting v4l-cx231xx-avcore-01.fw
cx25840 18-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
attach 417 5
cx231xx #1: cx231xx_417_register()
cx231xx #1: cx231xx_video_dev_alloc()
cx231xx #1: cx231xx #1: v4l2 driver version 0.0.1
cx231xx #1: cx231xx_dif_set_standard: setStandard to ffffffff
cx231xx #1: video_mux : 0
cx231xx #1: do_mode_ctrl_overrides : 0xb000
cx231xx #1: do_mode_ctrl_overrides NTSC
cx231xx #1: cx231xx #1/0: registered device video4 [v4l2]
cx231xx #1: cx231xx #1/0: registered device vbi2
cx231xx #1: V4L2 device registered as video4 and vbi2
cx231xx #1: cx231xx-audio.c: probing for cx231xx non standard usbaudio
cx231xx #1: EndPoint Addr 0x83, Alternate settings: 3
cx231xx #1: Alternate setting 0, max size= 512
cx231xx #1: Alternate setting 1, max size= 28
cx231xx #1: Alternate setting 2, max size= 52
cx231xx #1: EndPoint Addr 0x84, Alternate settings: 5
cx231xx #1: Alternate setting 0, max size= 512
cx231xx #1: Alternate setting 1, max size= 184
cx231xx #1: Alternate setting 2, max size= 728
cx231xx #1: Alternate setting 3, max size= 2892
cx231xx #1: Alternate setting 4, max size= 1800
cx231xx #1: EndPoint Addr 0x85, Alternate settings: 2
cx231xx #1: Alternate setting 0, max size= 512
cx231xx #1: Alternate setting 1, max size= 512
cx231xx #1: EndPoint Addr 0x86, Alternate settings: 2
cx231xx #1: Alternate setting 0, max size= 512
cx231xx #1: Alternate setting 1, max size= 576
cx231xx #1: EndPoint Addr 0x81, Alternate settings: 6
cx231xx #1: Alternate setting 0, max size= 512
cx231xx #1: Alternate setting 1, max size= 64
cx231xx #1: Alternate setting 2, max size= 128
cx231xx #1: Alternate setting 3, max size= 316
cx231xx #1: Alternate setting 4, max size= 712
cx231xx #1: Alternate setting 5, max size= 1424
cx231xx #1: setPowerMode::mode = 48, No Change req.
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: can't change interface 5 alt no. to 1 (err=-71)
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: cx231xx_initialize_codec()
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx_load_firmware: Error with mc417_register_write
cx231xx_initialize_codec() f/w load failed
cx231xx #1: cx231xx_stop_stream():: ep_mask = 8
cx231xx #1: can't change interface 4 alt no. to 0 (err=-71)
cx231xx #1: cx231xx_stop_stream():: ep_mask = 8
cx231xx #1: can't change interface 4 alt no. to 0 (err=-71)
cx231xx #1: cx231xx_stop_stream():: ep_mask = 8
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: cx231xx_stop_stream():: ep_mask = 8
cx231xx #1: can't change interface 4 alt no. to 0 (err=-71)
cx231xx #1: can't change interface 5 alt no. to 1 (err=-71)
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: cx231xx_initialize_codec()
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx #1: UsbInterface::sendCommand, failed with status --71
cx231xx_load_firmware: Error with mc417_register_write
cx231xx_initialize_codec() f/w load failed
cx231xx #1: cx231xx_stop_stream():: ep_mask = 8
cx231xx #1: UsbInterface::sendCommand, failed with status --71
TagsNo tags attached.

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2013-02-09 15:08 phloks New Issue