<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.32-358.18.1.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Aug 28 17:19:38 UTC 2013
<6>Command line: ro root=UUID=645a17df-36ab-4a02-9a71-ed53f964ef58 nomodeset rd_NO_LUKS  KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_MD_UUID=3e2b62b0:ff6cc46d:0bf9c68c:37236008 SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_LVM rd_NO_DM rhgb quiet
<6>KERNEL supported cpus:
<6>  Intel GenuineIntel
<6>  AMD AuthenticAMD
<6>  Centaur CentaurHauls
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 0000000000099c00 (usable)
<6> BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 00000000bbd53000 (usable)
<6> BIOS-e820: 00000000bbd53000 - 00000000bbd5a000 (ACPI NVS)
<6> BIOS-e820: 00000000bbd5a000 - 00000000cc0f9000 (usable)
<6> BIOS-e820: 00000000cc0f9000 - 00000000cc311000 (reserved)
<6> BIOS-e820: 00000000cc311000 - 00000000cc34b000 (usable)
<6> BIOS-e820: 00000000cc34b000 - 00000000cc3fd000 (ACPI NVS)
<6> BIOS-e820: 00000000cc3fd000 - 00000000cdfff000 (reserved)
<6> BIOS-e820: 00000000cdfff000 - 00000000ce000000 (usable)
<6> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
<6> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<6> BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
<6> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
<6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
<6> BIOS-e820: 0000000100000000 - 0000000830000000 (usable)
<6>DMI 2.7 present.
<4>SMBIOS version 2.7 @ 0xF04C0
<7>DMI: Supermicro X10SLE-F/HF/X10SLE, BIOS 1.0a 06/13/2013
<5>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
<7>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
<7>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>last_pfn = 0x830000 max_arch_pfn = 0x400000000
<7>MTRR default type: uncachable
<7>MTRR fixed ranges enabled:
<7>  00000-9FFFF write-back
<7>  A0000-BFFFF uncachable
<7>  C0000-CBFFF write-protect
<7>  CC000-E7FFF uncachable
<7>  E8000-FFFFF write-protect
<7>MTRR variable ranges enabled:
<7>  0 base 0000000000 mask 7800000000 write-back
<7>  1 base 0800000000 mask 7FE0000000 write-back
<7>  2 base 0820000000 mask 7FF0000000 write-back
<7>  3 base 00E0000000 mask 7FE0000000 uncachable
<7>  4 base 00D0000000 mask 7FF0000000 uncachable
<7>  5 disabled
<7>  6 disabled
<7>  7 disabled
<7>  8 disabled
<7>  9 disabled
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>original variable MTRRs
<7>reg 0, base: 0GB, range: 32GB, type WB
<7>reg 1, base: 32GB, range: 512MB, type WB
<7>reg 2, base: 33280MB, range: 256MB, type WB
<7>reg 3, base: 3584MB, range: 512MB, type UC
<7>reg 4, base: 3328MB, range: 256MB, type UC
<6>total RAM covered: 32768M
<6>Found optimal setting for mtrr clean up
<6> gran_size: 64K      chunk_size: 64K         num_reg: 8      lose cover RAM: 0G
<7>New variable MTRRs
<7>reg 0, base: 0GB, range: 2GB, type WB
<7>reg 1, base: 2GB, range: 1GB, type WB
<7>reg 2, base: 3GB, range: 256MB, type WB
<7>reg 3, base: 4GB, range: 4GB, type WB
<7>reg 4, base: 8GB, range: 8GB, type WB
<7>reg 5, base: 16GB, range: 16GB, type WB
<7>reg 6, base: 32GB, range: 512MB, type WB
<7>reg 7, base: 33280MB, range: 256MB, type WB
<7>e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
<6>last_pfn = 0xce000 max_arch_pfn = 0x400000000
<7>initial memory mapped : 0 - 20000000
<6>Using GB pages for direct mapping
<6>init_memory_mapping: 0000000000000000-00000000ce000000
<7> 0000000000 - 00c0000000 page 1G
<7> 00c0000000 - 00ce000000 page 2M
<7>kernel direct mapping tables up to ce000000 @ 10000-12000
<6>init_memory_mapping: 0000000100000000-0000000830000000
<7> 0100000000 - 0800000000 page 1G
<7> 0800000000 - 0830000000 page 2M
<7>kernel direct mapping tables up to 830000000 @ 11000-13000
<6>RAMDISK: 371ec000 - 37fefb21
<4>ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
<4>ACPI: XSDT 00000000cc3d3098 000B4 (v01 ALASKA    A M I 01072009 AMI  00010013)
<4>ACPI: FACP 00000000cc3e0968 0010C (v05 ALASKA    A M I 01072009 AMI  00010013)
<4>ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
<4>ACPI: DSDT 00000000cc3d31e8 0D77F (v02 ALASKA    A M I 00000000 INTL 20091112)
<4>ACPI: FACS 00000000cc3fb080 00040
<4>ACPI: APIC 00000000cc3e0a78 00092 (v03 ALASKA    A M I 01072009 AMI  00010013)
<4>ACPI: FPDT 00000000cc3e0b10 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)
<4>ACPI: SSDT 00000000cc3e0b58 00540 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
<4>ACPI: SSDT 00000000cc3e1098 00AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
<4>ACPI: SSDT 00000000cc3e1b70 002F2 (v01  PmRef  Cpu0Tst 00003000 INTL 20051117)
<4>ACPI: SSDT 00000000cc3e1e68 00348 (v01  PmRef    ApTst 00003000 INTL 20051117)
<4>ACPI: MCFG 00000000cc3e21b0 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
<4>ACPI: PRAD 00000000cc3e21f0 000CE (v02 PRADID  PRADTID 00000001 MSFT 03000001)
<4>ACPI: HPET 00000000cc3e22c0 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
<4>ACPI: SSDT 00000000cc3e22f8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
<4>ACPI: SSDT 00000000cc3e2668 0327D (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
<4>ACPI: SPMI 00000000cc3e58e8 00040 (v05 A M I   OEMSPMI 00000000 AMI. 00000000)
<4>ACPI: DMAR 00000000cc3e5928 00080 (v01 INTEL      HSW  00000001 INTL 00000001)
<4>ACPI: EINJ 00000000cc3e59a8 00130 (v01    AMI AMI EINJ 00000000      00000000)
<4>ACPI: ERST 00000000cc3e5ad8 00230 (v01  AMIER AMI ERST 00000000      00000000)
<4>ACPI: HEST 00000000cc3e5d08 000A8 (v01    AMI AMI HEST 00000000      00000000)
<4>ACPI: BERT 00000000cc3e5db0 00030 (v01    AMI AMI BERT 00000000      00000000)
<7>ACPI: Local APIC address 0xfee00000
<6>Setting APIC routing to flat.
<6>No NUMA configuration found
<6>Faking a node at 0000000000000000-0000000830000000
<6>Bootmem setup node 0 0000000000000000-0000000830000000
<6>  NODE_DATA [0000000000012000 - 0000000000045fff]
<6>  bootmap [0000000000100000 -  0000000000205fff] pages 106
<6>(8 early reservations) ==> bootmem [0000000000 - 0830000000]
<6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
<6>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
<6>  #2 [0001000000 - 000201b0a4]    TEXT DATA BSS ==> [0001000000 - 000201b0a4]
<6>  #3 [00371ec000 - 0037fefb21]          RAMDISK ==> [00371ec000 - 0037fefb21]
<6>  #4 [0000099c00 - 0000100000]    BIOS reserved ==> [0000099c00 - 0000100000]
<6>  #5 [000201c000 - 000201c22c]              BRK ==> [000201c000 - 000201c22c]
<6>  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
<6>  #7 [0000011000 - 0000012000]          PGTABLE ==> [0000011000 - 0000012000]
<6>found SMP MP-table at [ffff8800000fd6b0] fd6b0
<6>Reserving 131MB of memory at 48MB for crashkernel (System RAM: 33536MB)
<7> [ffffea0000000000-ffffea000f3fffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
<7> [ffffea000f400000-ffffea001cbfffff] PMD -> [ffff880038000000-ffff8800457fffff] on node 0
<4>Zone PFN ranges:
<4>  DMA      0x00000010 -> 0x00001000
<4>  DMA32    0x00001000 -> 0x00100000
<4>  Normal   0x00100000 -> 0x00830000
<4>Movable zone start PFN for each node
<4>early_node_map[6] active PFN ranges
<4>    0: 0x00000010 -> 0x00000099
<4>    0: 0x00000100 -> 0x000bbd53
<4>    0: 0x000bbd5a -> 0x000cc0f9
<4>    0: 0x000cc311 -> 0x000cc34b
<4>    0: 0x000cdfff -> 0x000ce000
<4>    0: 0x00100000 -> 0x00830000
<7>On node 0 totalpages: 8372406
<7>  DMA zone: 56 pages used for memmap
<7>  DMA zone: 107 pages reserved
<7>  DMA zone: 3814 pages, LIFO batch:0
<7>  DMA32 zone: 14280 pages used for memmap
<7>  DMA32 zone: 817509 pages, LIFO batch:31
<7>  Normal zone: 103040 pages used for memmap
<7>  Normal zone: 7433600 pages, LIFO batch:31
<6>ACPI: PM-Timer IO Port: 0x1808
<7>ACPI: Local APIC address 0xfee00000
<6>Setting APIC routing to flat.
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
<6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
<6>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
<6>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
<6>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
<6>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
<6>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Using ACPI (MADT) for SMP configuration information
<6>ACPI: HPET id: 0x8086a701 base: 0xfed00000
<6>SMP: Allowing 8 CPUs, 0 hotplug CPUs
<7>nr_irqs_gsi: 24
<6>PM: Registered nosave memory: 0000000000099000 - 000000000009a000
<6>PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
<6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
<6>PM: Registered nosave memory: 00000000bbd53000 - 00000000bbd5a000
<6>PM: Registered nosave memory: 00000000cc0f9000 - 00000000cc311000
<6>PM: Registered nosave memory: 00000000cc34b000 - 00000000cc3fd000
<6>PM: Registered nosave memory: 00000000cc3fd000 - 00000000cdfff000
<6>PM: Registered nosave memory: 00000000ce000000 - 00000000f8000000
<6>PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
<6>PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
<6>PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
<6>PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
<6>PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
<6>PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
<6>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
<6>PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
<6>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
<6>PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
<6>PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
<6>Allocating PCI resources starting at ce000000 (gap: ce000000:2a000000)
<6>Booting paravirtualized kernel on bare hardware
<6>NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u262144
<6>pcpu-alloc: s94552 r8192 d24232 u262144 alloc=1*2097152
<6>pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8254923
<4>Policy zone: Normal
<5>Kernel command line: ro root=UUID=645a17df-36ab-4a02-9a71-ed53f964ef58 nomodeset rd_NO_LUKS  KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_MD_UUID=3e2b62b0:ff6cc46d:0bf9c68c:37236008 SYSFONT=latarcyrheb-sun16 crashkernel=131M@0M rd_NO_LVM rd_NO_DM rhgb quiet
<6>PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
<6>Checking aperture...
<6>No AGP bridge found
<6>dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
<6>software IO TLB at phys 0x20000000 - 0x24000000
<6>Memory: 32796268k/34340864k available (5222k kernel code, 851240k absent, 693356k reserved, 7119k data, 1264k init)
<6>Hierarchical RCU implementation.
<6>NR_IRQS:33024 nr_irqs:472
<6>Extended CMOS year: 2000
<4>Console: colour VGA+ 80x25
<6>console [tty0] enabled
<6>allocated 134217728 bytes of page_cgroup
<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
<7>hpet clockevent registered
<4>Fast TSC calibration using PIT
<4>Detected 3492.022 MHz processor.
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 6984.04 BogoMIPS (lpj=3492022)
<6>pid_max: default: 32768 minimum: 301
<6>Security Framework initialized
<6>SELinux:  Initializing.
<7>SELinux:  Starting in permissive mode
<6>Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
<6>Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
<4>Mount-cache hash table entries: 256
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys net_cls
<6>Initializing cgroup subsys blkio
<6>Initializing cgroup subsys perf_event
<6>Initializing cgroup subsys net_prio
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>mce: CPU supports 9 MCE banks
<6>CPU0: Thermal monitoring enabled (TM1)
<6>using mwait in idle threads.
<6>ACPI: Core revision 20090903
<6>ftrace: converting mcount calls to 0f 1f 44 00 00
<6>ftrace: allocating 21439 entries in 85 pages
<6>dmar: Host address width 39
<6>dmar: DRHD base: 0x000000fed90000 flags: 0x1
<6>dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
<6>dmar: RMRR base: 0x000000cc28f000 end: 0x000000cc29bfff
<6>dmar: No ATSR found
<6>IOAPIC id 2 under DRHD base 0xfed90000
<6>HPET id 0 under DRHD base 0xfed90000
<6>Enabled IRQ remapping in x2apic mode
<6>Enabling x2apic
<6>Enabled x2apic
<6>APIC routing finalized to cluster x2apic.
<7>  alloc irq_desc for 24 on node 0
<7>  alloc kstat_irqs on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<7>alloc irq_2_iommu on node 0
<6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>CPU0: Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz stepping 03
<6>Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
<6>... version:                3
<6>... bit width:              48
<6>... generic registers:      4
<6>... value mask:             0000ffffffffffff
<6>... max period:             000000007fffffff
<6>... fixed-purpose events:   3
<6>... event mask:             000000070000000f
<6>NMI watchdog enabled, takes one hw-pmu counter.
<6>Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
<6>Brought up 8 CPUs
<6>Total of 8 processors activated (55872.35 BogoMIPS).
<7>sizeof(vma)=200 bytes
<7>sizeof(page)=56 bytes
<7>sizeof(inode)=592 bytes
<7>sizeof(dentry)=192 bytes
<7>sizeof(ext3inode)=800 bytes
<7>sizeof(buffer_head)=104 bytes
<7>sizeof(skbuff)=232 bytes
<7>sizeof(task_struct)=2648 bytes
<6>devtmpfs: initialized
<6>PM: Registering ACPI NVS region at bbd53000 (28672 bytes)
<6>PM: Registering ACPI NVS region at cc34b000 (729088 bytes)
<6>regulator: core version 0.5
<6>NET: Registered protocol family 16
<6>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
<6>ACPI: bus type pci registered
<5>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
<5>PCI: MCFG area at f8000000 reserved in E820
<6>PCI: Using MMCONFIG at f8000000 - fbffffff
<6>PCI: Using configuration type 1 for base access
<4>bio: create slab <bio-0> at 0
<7>ACPI: EC: Look up EC in DSDT
<4>ACPI: Executed 1 blocks of module-level executable AML code
<5>ACPI: BIOS _OSI(Linux) query ignored
<4>ACPI: Dynamic OEM Table Load - [PRAD] OemId [PRADID] OemTableId [PRADTID]
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: Power Resource [FN00] (off)
<6>ACPI: Power Resource [FN01] (off)
<6>ACPI: Power Resource [FN02] (off)
<6>ACPI: Power Resource [FN03] (off)
<6>ACPI: Power Resource [FN04] (off)
<6>ACPI: No dock devices found.
<6>HEST: Table parsing has been initialized.
<6>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
<6>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
<6>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
<6>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
<6>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
<6>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
<6>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
<6>pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
<6>pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
<6>pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
<6>pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
<6>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:01.0: PME# disabled
<7>pci 0000:00:14.0: reg 10: [mem 0xf7300000-0xf730ffff 64bit]
<6>pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>pci 0000:00:14.0: PME# disabled
<7>pci 0000:00:16.0: reg 10: [mem 0xf7317000-0xf731700f 64bit]
<6>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:16.0: PME# disabled
<7>pci 0000:00:16.1: reg 10: [mem 0xf7316000-0xf731600f 64bit]
<6>pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:16.1: PME# disabled
<7>pci 0000:00:1a.0: reg 10: [mem 0xf7314000-0xf73143ff]
<6>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1a.0: PME# disabled
<6>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1c.0: PME# disabled
<7>pci 0000:00:1d.0: reg 10: [mem 0xf7313000-0xf73133ff]
<6>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1d.0: PME# disabled
<7>pci 0000:00:1f.2: reg 10: [io  0xf070-0xf077]
<7>pci 0000:00:1f.2: reg 14: [io  0xf060-0xf063]
<7>pci 0000:00:1f.2: reg 18: [io  0xf050-0xf057]
<7>pci 0000:00:1f.2: reg 1c: [io  0xf040-0xf043]
<7>pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
<7>pci 0000:00:1f.2: reg 24: [mem 0xf7312000-0xf73127ff]
<6>pci 0000:00:1f.2: PME# supported from D3hot
<6>pci 0000:00:1f.2: PME# disabled
<7>pci 0000:00:1f.3: reg 10: [mem 0xf7311000-0xf73110ff 64bit]
<7>pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
<7>pci 0000:00:1f.6: reg 10: [mem 0xf7310000-0xf7310fff 64bit]
<7>pci 0000:01:00.0: reg 10: [mem 0xf7180000-0xf71fffff]
<7>pci 0000:01:00.0: reg 18: [io  0xe020-0xe03f]
<7>pci 0000:01:00.0: reg 1c: [mem 0xf7284000-0xf7287fff]
<7>pci 0000:01:00.0: reg 30: [mem 0xf7240000-0xf727ffff pref]
<6>pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:01:00.0: PME# disabled
<7>pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.1: reg 10: [mem 0xf7100000-0xf717ffff]
<7>pci 0000:01:00.1: reg 18: [io  0xe000-0xe01f]
<7>pci 0000:01:00.1: reg 1c: [mem 0xf7280000-0xf7283fff]
<7>pci 0000:01:00.1: reg 30: [mem 0xf7200000-0xf723ffff pref]
<6>pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
<6>pci 0000:01:00.1: PME# disabled
<7>pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff]
<6>pci 0000:00:01.0: PCI bridge to [bus 01-01]
<7>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
<7>pci 0000:00:01.0:   bridge window [mem 0xf7100000-0xf72fffff]
<7>pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>pci 0000:02:00.0: supports D1 D2
<6>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:02:00.0: PME# disabled
<6>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
<7>pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
<7>pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf70fffff]
<7>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
<7>pci 0000:03:00.0: reg 14: [mem 0xf7000000-0xf701ffff]
<7>pci 0000:03:00.0: reg 18: [io  0xd000-0xd07f]
<7>pci 0000:03:00.0: supports D1 D2
<6>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:03:00.0: PME# disabled
<6>pci 0000:02:00.0: PCI bridge to [bus 03-03]
<7>pci 0000:02:00.0:   bridge window [io  0xd000-0xdfff]
<7>pci 0000:02:00.0:   bridge window [mem 0xf6000000-0xf70fffff]
<7>pci 0000:02:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
<6> pci0000:00: Requesting ACPI _OSC control (0x1d)
<6> pci0000:00: ACPI _OSC control (0x18) granted
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
<6>vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>vgaarb: loaded
<6>vgaarb: bridge control possible 0000:03:00.0
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>PCI: Using ACPI for IRQ routing
<7>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
<7>PCI: pci_cache_line_size set to 64 bytes
<6>NetLabel: Initializing
<6>NetLabel:  domain hash size = 128
<6>NetLabel:  protocols = UNLABELED CIPSOv4
<6>NetLabel:  unlabeled traffic allowed by default
<7>  alloc irq_desc for 25 on node 0
<7>  alloc kstat_irqs on node 0
<7>alloc irq_2_iommu on node 0
<7>  alloc irq_desc for 26 on node 0
<7>  alloc kstat_irqs on node 0
<7>alloc irq_2_iommu on node 0
<7>  alloc irq_desc for 27 on node 0
<7>  alloc kstat_irqs on node 0
<7>alloc irq_2_iommu on node 0
<7>  alloc irq_desc for 28 on node 0
<7>  alloc kstat_irqs on node 0
<7>alloc irq_2_iommu on node 0
<7>  alloc irq_desc for 29 on node 0
<7>  alloc kstat_irqs on node 0
<7>alloc irq_2_iommu on node 0
<6>HPET: 8 timers in total, 5 timers will be used for per-cpu timer
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 25, 26, 27, 28, 29, 0
<6>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
<7>hpet: hpet2 irq 25 for MSI
<7>hpet: hpet3 irq 26 for MSI
<7>hpet: hpet4 irq 27 for MSI
<7>hpet: hpet5 irq 28 for MSI
<7>hpet: hpet6 irq 29 for MSI
<6>Switching to clocksource hpet
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<7>pnp 00:00: [io  0x0cf8-0x0cff]
<7>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
<7>pnp 00:01: [mem 0xfed40000-0xfed44fff]
<7>pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
<7>pnp 00:02: [io  0x0000-0x001f]
<7>pnp 00:02: [io  0x0081-0x0091]
<7>pnp 00:02: [io  0x0093-0x009f]
<7>pnp 00:02: [io  0x00c0-0x00df]
<7>pnp 00:02: [dma 4]
<7>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
<7>pnp 00:03: [mem 0xff000000-0xffffffff]
<7>pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
<7>pnp 00:04: [mem 0xfed00000-0xfed003ff]
<7>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
<7>pnp 00:05: [io  0x002e-0x002f]
<7>pnp 00:05: [io  0x004e-0x004f]
<7>pnp 00:05: [io  0x0061]
<7>pnp 00:05: [io  0x0063]
<7>pnp 00:05: [io  0x0065]
<7>pnp 00:05: [io  0x0067]
<7>pnp 00:05: [io  0x0070]
<7>pnp 00:05: [io  0x0080]
<7>pnp 00:05: [io  0x0092]
<7>pnp 00:05: [io  0x00b2-0x00b3]
<7>pnp 00:05: [io  0x0680-0x069f]
<7>pnp 00:05: [io  0xffff]
<7>pnp 00:05: [io  0xffff]
<7>pnp 00:05: [io  0xffff]
<7>pnp 00:05: [io  0x1c00-0x1cfe]
<7>pnp 00:05: [io  0x1d00-0x1dfe]
<7>pnp 00:05: [io  0x1e00-0x1efe]
<7>pnp 00:05: [io  0x1f00-0x1ffe]
<7>pnp 00:05: [io  0x0ca4-0x0ca7]
<7>pnp 00:05: [io  0x1800-0x18fe]
<7>pnp 00:05: [io  0x164e-0x164f]
<7>pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>pnp 00:06: [io  0x0070-0x0077]
<7>pnp 00:06: [irq 8]
<7>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>pnp 00:07: [io  0x1854-0x1857]
<7>pnp 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
<7>pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
<7>pnp 00:08: [io  0x0a00-0x0a1f]
<7>pnp 00:08: [io  0x0a30-0x0a3f]
<7>pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
<7>pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>pnp 00:09: [io  0x03f8-0x03ff]
<7>pnp 00:09: [irq 4]
<7>pnp 00:09: [dma 0 disabled]
<7>pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
<7>pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
<7>pnp 00:0a: [io  0x0a00-0x0a1f]
<7>pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>pnp 00:0b: [io  0x0010-0x001f]
<7>pnp 00:0b: [io  0x0022-0x003f]
<7>pnp 00:0b: [io  0x0044-0x005f]
<7>pnp 00:0b: [io  0x0062-0x0063]
<7>pnp 00:0b: [io  0x0065-0x006f]
<7>pnp 00:0b: [io  0x0072-0x007f]
<7>pnp 00:0b: [io  0x0080]
<7>pnp 00:0b: [io  0x0084-0x0086]
<7>pnp 00:0b: [io  0x0088]
<7>pnp 00:0b: [io  0x008c-0x008e]
<7>pnp 00:0b: [io  0x0090-0x009f]
<7>pnp 00:0b: [io  0x00a2-0x00bf]
<7>pnp 00:0b: [io  0x00e0-0x00ef]
<7>pnp 00:0b: [io  0x04d0-0x04d1]
<7>pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>pnp 00:0c: [io  0x00f0-0x00ff]
<7>pnp 00:0c: [irq 13]
<7>pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
<7>pnp 00:0d: [io  0x03e8-0x03ef]
<7>pnp 00:0d: [irq 7]
<7>pnp 00:0d: [dma 0 disabled]
<7>pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
<7>pnp 00:0e: [io  0x0ca2]
<7>pnp 00:0e: [io  0x0ca3]
<7>pnp 00:0e: Plug and Play ACPI device, IDs IPI0001 (active)
<7>pnp 00:0f: [mem 0xfed1c000-0xfed1ffff]
<7>pnp 00:0f: [mem 0xfed10000-0xfed17fff]
<7>pnp 00:0f: [mem 0xfed18000-0xfed18fff]
<7>pnp 00:0f: [mem 0xfed19000-0xfed19fff]
<7>pnp 00:0f: [mem 0xf8000000-0xfbffffff]
<7>pnp 00:0f: [mem 0xfed20000-0xfed3ffff]
<7>pnp 00:0f: [mem 0xfed90000-0xfed93fff]
<7>pnp 00:0f: [mem 0xfed45000-0xfed8ffff]
<7>pnp 00:0f: [mem 0xff000000-0xffffffff]
<7>pnp 00:0f: [mem 0xfee00000-0xfeefffff]
<7>pnp 00:0f: [mem 0xf7fef000-0xf7feffff]
<7>pnp 00:0f: [mem 0xf7ff0000-0xf7ff0fff]
<7>pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>pnp: PnP ACPI: found 16 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
<6>system 00:05: [io  0x0680-0x069f] has been reserved
<6>system 00:05: [io  0xffff] has been reserved
<6>system 00:05: [io  0xffff] has been reserved
<6>system 00:05: [io  0xffff] has been reserved
<6>system 00:05: [io  0x1c00-0x1cfe] has been reserved
<6>system 00:05: [io  0x1d00-0x1dfe] has been reserved
<6>system 00:05: [io  0x1e00-0x1efe] has been reserved
<6>system 00:05: [io  0x1f00-0x1ffe] has been reserved
<6>system 00:05: [io  0x0ca4-0x0ca7] has been reserved
<6>system 00:05: [io  0x1800-0x18fe] has been reserved
<6>system 00:05: [io  0x164e-0x164f] has been reserved
<6>system 00:07: [io  0x1854-0x1857] has been reserved
<6>system 00:08: [io  0x0a00-0x0a1f] has been reserved
<6>system 00:08: [io  0x0a30-0x0a3f] has been reserved
<6>system 00:0a: [io  0x0a00-0x0a1f] has been reserved
<6>system 00:0b: [io  0x04d0-0x04d1] has been reserved
<6>system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved
<6>system 00:0f: [mem 0xfed10000-0xfed17fff] has been reserved
<6>system 00:0f: [mem 0xfed18000-0xfed18fff] has been reserved
<6>system 00:0f: [mem 0xfed19000-0xfed19fff] has been reserved
<6>system 00:0f: [mem 0xf8000000-0xfbffffff] has been reserved
<6>system 00:0f: [mem 0xfed20000-0xfed3ffff] has been reserved
<6>system 00:0f: [mem 0xfed90000-0xfed93fff] could not be reserved
<6>system 00:0f: [mem 0xfed45000-0xfed8ffff] has been reserved
<6>system 00:0f: [mem 0xff000000-0xffffffff] has been reserved
<6>system 00:0f: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>system 00:0f: [mem 0xf7fef000-0xf7feffff] has been reserved
<6>system 00:0f: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
<7>PCI: max bus depth: 2 pci_try_num: 3
<7>pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff]
<6>pci 0000:01:00.0: BAR 7: assigned [mem 0xf7288000-0xf72a7fff]
<6>pci 0000:01:00.0: BAR 7: set to [mem 0xf7288000-0xf72a7fff] (PCI address [0xf7288000-0xf72a7fff]
<7>pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff]
<6>pci 0000:01:00.0: BAR 10: assigned [mem 0xf72a8000-0xf72c7fff]
<6>pci 0000:01:00.0: BAR 10: set to [mem 0xf72a8000-0xf72c7fff] (PCI address [0xf72a8000-0xf72c7fff]
<7>pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff]
<6>pci 0000:01:00.1: BAR 7: assigned [mem 0xf72c8000-0xf72e7fff]
<6>pci 0000:01:00.1: BAR 7: set to [mem 0xf72c8000-0xf72e7fff] (PCI address [0xf72c8000-0xf72e7fff]
<7>pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff]
<7>pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff]
<6>pci 0000:01:00.1: BAR 10: can't assign mem (size 0x20000)
<6>pci 0000:00:01.0: PCI bridge to [bus 01-01]
<6>pci 0000:00:01.0: PCI bridge to [bus 01-01]
<6>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
<6>pci 0000:00:01.0:   bridge window [mem 0xf7100000-0xf72fffff]
<6>pci 0000:00:01.0:   bridge window [mem pref disabled]
<6>pci 0000:02:00.0: PCI bridge to [bus 03-03]
<6>pci 0000:02:00.0: PCI bridge to [bus 03-03]
<6>pci 0000:02:00.0:   bridge window [io  0xd000-0xdfff]
<6>pci 0000:02:00.0:   bridge window [mem 0xf6000000-0xf70fffff]
<6>pci 0000:02:00.0:   bridge window [mem pref disabled]
<6>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
<6>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
<6>pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
<6>pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf70fffff]
<6>pci 0000:00:1c.0:   bridge window [mem pref disabled]
<7>  alloc irq_desc for 16 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<6>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>pci 0000:00:01.0: setting latency timer to 64
<6>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>pci 0000:00:1c.0: setting latency timer to 64
<7>pci 0000:02:00.0: setting latency timer to 64
<7>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
<7>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
<7>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
<7>pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
<7>pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
<7>pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
<7>pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff]
<7>pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff]
<7>pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff]
<7>pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff]
<7>pci_bus 0000:00: resource 14 [mem 0xd0000000-0xfeafffff]
<7>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
<7>pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf72fffff]
<7>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
<7>pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf70fffff]
<7>pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
<7>pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf70fffff]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<6>pci 0000:00:14.0: PCI INT A disabled
<6>pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<6>pci 0000:00:1a.0: PCI INT A disabled
<7>  alloc irq_desc for 23 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<6>pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<6>pci 0000:00:1d.0: PCI INT A disabled
<7>pci 0000:03:00.0: Boot video device
<6>Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 14350k freed
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1380793747.307:1): initialized
<6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.2
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>msgmni has been set to 32768
<7>SELinux:  Registering netfilter hooks
<6>alg: No test for stdrng (krng)
<4>ksign: Installing public key data
<4>Loading keyring
<4>- Added public key 2B202C2FC9DD26CD
<4>- User ID: CentOS (Kernel Module GPG key)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>pcieport 0000:00:01.0: setting latency timer to 64
<7>  alloc irq_desc for 30 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<7>intel_idle: MWAIT substates: 0x42120
<7>intel_idle: does not run on family 6 model 60
<6>ipmi message handler version 39.2
<6>IPMI System Interface driver.
<6>ipmi_si: Adding ACPI-specified kcs state machine
<6>ipmi_si: Adding SMBIOS-specified kcs state machine: duplicate interface
<6>ipmi_si: Adding ACPI-specified kcs state machine: duplicate interface
<6>ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
<6>ipmi: Found new BMC (man_id: 0x002a7c,  prod_id: 0x0807, dev_id: 0x20)
<6>IPMI kcs interface initialized
<6>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
<6>ACPI: Power Button [PWRB]
<6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>ACPI: Power Button [PWRF]
<6>ACPI: Fan [FAN0] (off)
<6>ACPI: Fan [FAN1] (off)
<6>ACPI: Fan [FAN2] (off)
<6>ACPI: Fan [FAN3] (off)
<6>ACPI: Fan [FAN4] (off)
<7>ACPI: acpi_idle registered with cpuidle
<4>ACPI: SSDT 00000000cc306c18 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
<7>Monitor-Mwait will be used to enter C-1 state
<7>Monitor-Mwait will be used to enter C-2 state
<4>ACPI: SSDT 00000000cc306618 005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
<4>ACPI: SSDT 00000000cc305d98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
<6>thermal LNXTHERM:01: registered as thermal_zone0
<6>ACPI: Thermal Zone [TZ00] (28 C)
<6>thermal LNXTHERM:02: registered as thermal_zone1
<6>ACPI: Thermal Zone [TZ01] (30 C)
<6>ERST: Could not register with persistent store
<6>ERST: Error Record Serialization Table (ERST) support is initialized.
<6>GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
<6>Non-volatile memory driver v1.3
<6>Linux agpgart interface v0.103
<6>crash memory driver: version 1.1
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS2 at I/O 0x3e8 (irq = 7) is a 16550A
<6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:0d: ttyS2 at I/O 0x3e8 (irq = 7) is a 16550A
<6>brd: module loaded
<6>loop: module loaded
<6>input: Macintosh mouse button emulation as /devices/virtual/input/input2
<6>Fixed MDIO Bus: probed
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>ehci_hcd 0000:00:1a.0: setting latency timer to 64
<6>ehci_hcd 0000:00:1a.0: EHCI Host Controller
<6>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:1a.0: debug port 2
<7>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
<6>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7314000
<6>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:1a.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>ehci_hcd 0000:00:1d.0: setting latency timer to 64
<6>ehci_hcd 0000:00:1d.0: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:1d.0: debug port 2
<7>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
<6>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7313000
<6>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: EHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 ehci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.0
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>uhci_hcd: USB Universal Host Controller Interface driver
<6>PNP: No PS/2 controller found. Probing ports directly.
<6>mice: PS/2 mouse device common for all mice
<6>rtc_cmos 00:06: RTC can wake from S4
<6>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>EFI Variables Facility v0.08 2004-May-17
<6>usbcore: registered new interface driver hiddev
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<6>TCP cubic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<4>registered taskstats version 1
<6>rtc_cmos 00:06: setting system clock to 2013-10-03 09:49:08 UTC (1380793748)
<6>Initalizing network drop monitor service
<6>Freeing unused kernel memory: 1264k freed
<6>Write protecting the kernel read-only data: 10240k
<6>Freeing unused kernel memory: 900k freed
<6>Freeing unused kernel memory: 1672k freed
<6>dracut: dracut-004-303.el6
<6>dracut: rd_NO_LUKS: removing cryptoluks activation
<6>dracut: rd_NO_LVM: removing LVM activation
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
<6>udev: starting version 147
<6>dracut: Starting plymouth daemon
<7>ahci 0000:00:1f.2: version 3.0
<7>  alloc irq_desc for 19 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<6>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<7>  alloc irq_desc for 31 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
<6>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
<6>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
<7>ahci 0000:00:1f.2: setting latency timer to 64
<6>scsi0 : ahci
<6>scsi1 : ahci
<6>scsi2 : ahci
<6>scsi3 : ahci
<6>scsi4 : ahci
<6>scsi5 : ahci
<6>ata1: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312100 irq 31
<6>ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 31
<6>ata3: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312200 irq 31
<6>ata4: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312280 irq 31
<6>ata5: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312300 irq 31
<6>ata6: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312380 irq 31
<6>usb 1-1: new high speed USB device number 2 using ehci_hcd
<6>usb 1-1: New USB device found, idVendor=8087, idProduct=8008
<6>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>hub 1-1:1.0: USB hub found
<6>hub 1-1:1.0: 6 ports detected
<6>Refined TSC clocksource calibration: 3491.927 MHz.
<6>Switching to clocksource tsc
<6>ata4: SATA link down (SStatus 0 SControl 300)
<6>ata6: SATA link down (SStatus 0 SControl 300)
<6>ata5: SATA link down (SStatus 0 SControl 300)
<6>ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<4>ata1.00: ACPI _SDD failed (AE 0x5)
<6>ata3: SATA link down (SStatus 0 SControl 300)
<6>usb 2-1: new high speed USB device number 2 using ehci_hcd
<6>usb 2-1: New USB device found, idVendor=8087, idProduct=8000
<6>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>hub 2-1:1.0: USB hub found
<6>hub 2-1:1.0: 6 ports detected
<6>ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<4>ata2.00: ACPI _SDD failed (AE 0x5)
<6>ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<4>ata1.00: ACPI _SDD failed (AE 0x5)
<4>ata1.00: ACPI: failed the second time, disabled
<6>ata1.00: ATA-9: ST2000NM0033-9ZM175, 0001, max UDMA/133
<6>ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>ata1.00: configured for UDMA/133
<5>scsi 0:0:0:0: Direct-Access     ATA      ST2000NM0033-9ZM 0001 PQ: 0 ANSI: 5
<6>ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<4>ata2.00: ACPI _SDD failed (AE 0x5)
<4>ata2.00: ACPI: failed the second time, disabled
<6>ata2.00: ATA-9: ST2000NM0033-9ZM175, 0001, max UDMA/133
<6>ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>ata2.00: configured for UDMA/133
<5>scsi 1:0:0:0: Direct-Access     ATA      ST2000NM0033-9ZM 0001 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
<5>sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda:
<6> sdb: sda1 sda2 sda3 sda4 < sdb1 sdb2 sdb3 sdb4 < sda5 >
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<4> sdb5 >
<5>sd 1:0:0:0: [sdb] Attached SCSI disk
<6>md: bind<sda2>
<6>md: bind<sdb2>
<6>md: raid1 personality registered for level 1
<4>bio: create slab <bio-1> at 1
<6>md/raid1:md1: active with 2 out of 2 mirrors
<6>created bitmap (2 pages) for device md1
<6>md1: bitmap initialized from disk: read 1 pages, set 0 of 3202 bits
<6>md1: detected capacity change from 0 to 214823665664
<6> md1: unknown partition table
<6>EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: 
<6>dracut: Mounted root filesystem /dev/md1
<6>dracut: Loading SELinux policy
<5>type=1404 audit(1380793755.279:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<7>SELinux: 2048 avtab hash slots, 278017 rules.
<7>SELinux: 2048 avtab hash slots, 278017 rules.
<7>SELinux:  9 users, 12 roles, 3900 types, 205 bools, 1 sens, 1024 cats
<7>SELinux:  81 classes, 278017 rules
<7>SELinux:  Completing initialization.
<7>SELinux:  Setting up existing superblocks.
<7>SELinux: initialized (dev md1, type ext4), uses xattr
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
<7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
<7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
<7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>type=1403 audit(1380793755.586:3): policy loaded auid=4294967295 ses=4294967295
<6>dracut: 
<6>dracut: Switching root
<6>udev: starting version 147
<6>xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>xhci_hcd 0000:00:14.0: setting latency timer to 64
<6>xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<7>xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
<6>xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7300000
<7>  alloc irq_desc for 32 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>xhci_hcd 0000:00:14.0: irq 32 for MSI/MSI-X
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: xHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 xhci_hcd
<6>usb usb3: SerialNumber: 0000:00:14.0
<6>usb usb3: configuration #1 chosen from 1 choice
<7>xHCI xhci_add_endpoint called for root hub
<7>xHCI xhci_check_bandwidth called for root hub
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 12 ports detected
<6>xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<4>usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: xHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.32-358.18.1.el6.x86_64 xhci_hcd
<6>usb usb4: SerialNumber: 0000:00:14.0
<6>usb usb4: configuration #1 chosen from 1 choice
<7>xHCI xhci_add_endpoint called for root hub
<7>xHCI xhci_check_bandwidth called for root hub
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 6 ports detected
<6>pps_core: LinuxPPS API ver. 1 registered
<6>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>PTP clock support registered
<6>dca service started, version 1.12.1
<6>igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k
<6>igb: Copyright (c) 2007-2012 Intel Corporation.
<6>igb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>igb 0000:01:00.0: setting latency timer to 64
<7>  alloc irq_desc for 33 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 33 for MSI/MSI-X
<7>  alloc irq_desc for 34 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 34 for MSI/MSI-X
<7>  alloc irq_desc for 35 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 35 for MSI/MSI-X
<7>  alloc irq_desc for 36 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 36 for MSI/MSI-X
<7>  alloc irq_desc for 37 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 37 for MSI/MSI-X
<7>  alloc irq_desc for 38 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 38 for MSI/MSI-X
<7>  alloc irq_desc for 39 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 39 for MSI/MSI-X
<7>  alloc irq_desc for 40 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 40 for MSI/MSI-X
<7>  alloc irq_desc for 41 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.0: irq 41 for MSI/MSI-X
<6>igb 0000:01:00.0: added PHC on eth0
<6>igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
<6>igb 0000:01:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:c7:a8:b0
<6>igb 0000:01:00.0: eth0: PBA No: 010C00-000
<6>igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
<7>  alloc irq_desc for 17 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<6>igb 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
<7>igb 0000:01:00.1: setting latency timer to 64
<7>  alloc irq_desc for 42 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 42 for MSI/MSI-X
<7>  alloc irq_desc for 43 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 43 for MSI/MSI-X
<7>  alloc irq_desc for 44 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 44 for MSI/MSI-X
<7>  alloc irq_desc for 45 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 45 for MSI/MSI-X
<7>  alloc irq_desc for 46 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 46 for MSI/MSI-X
<7>  alloc irq_desc for 47 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 47 for MSI/MSI-X
<7>  alloc irq_desc for 48 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 48 for MSI/MSI-X
<7>  alloc irq_desc for 49 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 49 for MSI/MSI-X
<7>  alloc irq_desc for 50 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<7>igb 0000:01:00.1: irq 50 for MSI/MSI-X
<6>igb 0000:01:00.1: added PHC on eth1
<6>igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
<6>igb 0000:01:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:c7:a8:b1
<6>igb 0000:01:00.1: eth1: PBA No: 010C00-000
<6>igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>iTCO_vendor_support: vendor-support=0
<6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
<6>iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 1:0:0:0: Attached scsi generic sg1 type 0
<6>usb 3-7: new high speed USB device number 2 using xhci_hcd
<6>usb 3-7: New USB device found, idVendor=0000, idProduct=0001
<6>usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>usb 3-7: configuration #1 chosen from 1 choice
<6>hub 3-7:1.0: USB hub found
<6>hub 3-7:1.0: 4 ports detected
<6>md: bind<sdb5>
<7>  alloc irq_desc for 18 on node -1
<7>  alloc kstat_irqs on node -1
<7>alloc irq_2_iommu on node -1
<6>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<6>md: bind<sda5>
<6>md/raid1:md2: active with 2 out of 2 mirrors
<6>created bitmap (13 pages) for device md2
<6>md2: bitmap initialized from disk: read 1 pages, set 0 of 26475 bits
<6>md2: detected capacity change from 0 to 1776705929216
<6> md2: unknown partition table
<6>md: bind<sda1>
<6>md: bind<sdb1>
<6>md/raid1:md0: active with 2 out of 2 mirrors
<6>md0: detected capacity change from 0 to 209649664
<6> md0: unknown partition table
<6>usb 3-7.1: new low speed USB device number 3 using xhci_hcd
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>usb 3-7.1: New USB device found, idVendor=0557, idProduct=2419
<6>usb 3-7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>usb 3-7.1: configuration #1 chosen from 1 choice
<4>usb 3-7.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<4>usb 3-7.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 40 microframes
<6>input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.0/input/input3
<6>generic-usb 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-7.1/input0
<6>input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.1/input/input4
<6>generic-usb 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-7.1/input1
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3-fs (md0): using internal journal
<6>EXT3-fs (md0): mounted filesystem with ordered data mode
<7>SELinux: initialized (dev md0, type ext3), uses xattr
<6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<5>XFS (md2): Mounting Filesystem
<6>XFS (md2): Ending clean mount
<7>SELinux: initialized (dev md2, type xfs), uses xattr
<6>Adding 8191992k swap on /dev/sda3.  Priority:-1 extents:1 across:8191992k 
<6>Adding 8191992k swap on /dev/sdb3.  Priority:-2 extents:1 across:8191992k 
<7>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
<7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<6>NET: Registered protocol family 10
<6>lo: Disabled Privacy Extensions
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<4>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>All bugs added by David S. Miller <davem@redhat.com>
<6>Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
<6>bonding: bond0: setting mode to 802.3ad (4).
<6>bonding: bond0: Setting MII monitoring interval to 100.
<6>bonding: bond0: setting xmit hash policy to layer2+3 (2).
<6>bonding: bond0: setting mode to 802.3ad (4).
<6>bonding: bond0: Setting MII monitoring interval to 100.
<6>bonding: bond0: setting xmit hash policy to layer2+3 (2).
<6>ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>8021q: adding VLAN 0 to HW filter on device bond0
<6>bonding: bond0: setting mode to 802.3ad (4).
<6>bonding: bond0: Setting MII monitoring interval to 100.
<6>bonding: bond0: setting xmit hash policy to layer2+3 (2).
<6>bonding: bond0: Adding slave eth0.
<6>8021q: adding VLAN 0 to HW filter on device eth0
<6>bonding: bond0: enslaving eth0 as a backup interface with a down link.
<6>bonding: bond0: Adding slave eth1.
<6>8021q: adding VLAN 0 to HW filter on device eth1
<6>bonding: bond0: enslaving eth1 as a backup interface with a down link.
<5>Bridge firewalling registered
<6>ADDRCONF(NETDEV_UP): bond0: link is not ready
<6>8021q: adding VLAN 0 to HW filter on device bond0
<6>device bond0 entered promiscuous mode
<6>device eth0 entered promiscuous mode
<6>device eth1 entered promiscuous mode
<6>lan0: starting userspace STP failed, starting kernel STP
<6>igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
<6>bond0: link status definitely up for interface eth0, 1000 Mbps full duplex.
<6>ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
<6>lan0: topology change detected, propagating
<6>lan0: port 1(bond0) entering forwarding state
<6>igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
<6>bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
<7>lan0: no IPv6 routers present
<7>bond0: no IPv6 routers present
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
<6>device virbr0-nic entered promiscuous mode
<6>virbr0: starting userspace STP failed, starting kernel STP
<6>Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0)
<6>Ebtables v2.0 registered
<7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<6>lo: Disabled Privacy Extensions
<7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<6>igb: eth0 NIC Link is Down
<6>igb: eth1 NIC Link is Down
<6>bonding: bond0: link status definitely down for interface eth0, disabling it
<6>bonding: bond0: link status definitely down for interface eth1, disabling it
<6>lan0: port 1(bond0) entering disabled state
<6>igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
<6>bond0: link status definitely up for interface eth0, 1000 Mbps full duplex.
<6>lan0: topology change detected, propagating
<6>lan0: port 1(bond0) entering forwarding state
<6>igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
<6>bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
<6>md: data-check of RAID array md0
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 204736k.
<6>md: md0: data-check done.
<6>md: data-check of RAID array md2
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 1735064384k.
<6>md: delaying data-check of md1 until md2 has finished (they share one or more physical units)
<6>md: md2: data-check done.
<6>md: data-check of RAID array md1
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 209788736k.
<6>md: md1: data-check done.
<6>device vnet0 entered promiscuous mode
<6>lan0: topology change detected, propagating
<6>lan0: port 2(vnet0) entering forwarding state
<7>vnet0: no IPv6 routers present
<3>kvm: 5309: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5309: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5309: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5309: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<6>device vnet1 entered promiscuous mode
<6>lan0: topology change detected, propagating
<6>lan0: port 3(vnet1) entering forwarding state
<6>device vnet2 entered promiscuous mode
<6>lan0: topology change detected, propagating
<6>lan0: port 4(vnet2) entering forwarding state
<6>device vnet3 entered promiscuous mode
<6>lan0: topology change detected, propagating
<6>lan0: port 5(vnet3) entering forwarding state
<7>vnet1: no IPv6 routers present
<7>vnet2: no IPv6 routers present
<3>kvm: 5841: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<7>vnet3: no IPv6 routers present
<3>kvm: 5875: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5910: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5841: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5875: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5910: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5309: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5910: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5841: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<3>kvm: 5875: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd
<4>hrtimer: interrupt took 10597 ns
<6>md: data-check of RAID array md0
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 204736k.
<6>md: md0: data-check done.
<6>md: data-check of RAID array md2
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 1735064384k.
<6>md: delaying data-check of md1 until md2 has finished (they share one or more physical units)
<6>md: md2: data-check done.
<6>md: data-check of RAID array md1
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 209788736k.
<6>md: md1: data-check done.
<6>md: data-check of RAID array md0
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 204736k.
<6>md: md0: data-check done.
<6>md: data-check of RAID array md2
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 1735064384k.
<6>md: delaying data-check of md1 until md2 has finished (they share one or more physical units)
<6>md: md2: data-check done.
<6>md: data-check of RAID array md1
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 209788736k.
<6>md: md1: data-check done.
<6>ipmi device interface
<6>md: data-check of RAID array md0
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 204736k.
<6>md: md0: data-check done.
<6>md: data-check of RAID array md2
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 1735064384k.
<6>md: delaying data-check of md1 until md2 has finished (they share one or more physical units)
<6>md: md2: data-check done.
<6>md: data-check of RAID array md1
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 209788736k.
<6>md: md1: data-check done.
<6>md: data-check of RAID array md0
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 204736k.
<6>md: md0: data-check done.
<6>md: data-check of RAID array md2
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 1735064384k.
<6>md: delaying data-check of md1 until md2 has finished (they share one or more physical units)
<6>md: md2: data-check done.
<6>md: data-check of RAID array md1
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 209788736k.
<6>md: md1: data-check done.
<6>md: data-check of RAID array md0
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 204736k.
<6>md: md0: data-check done.
<6>md: data-check of RAID array md2
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 1735064384k.
<6>md: delaying data-check of md1 until md2 has finished (they share one or more physical units)
<6>md: md2: data-check done.
<6>md: data-check of RAID array md1
<6>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
<6>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
<6>md: using 128k window, over a total of 209788736k.
<6>md: md1: data-check done.
<4>Disabling lock debugging due to kernel taint
<0>[Hardware Error]: CPU 4: Machine Check Exception: 5 Bank 6: be0000000100110a
<0>[Hardware Error]: TSC 2be2685446177a ADDR 2c5cca3c0 MISC 1080000086 
<0>[Hardware Error]: PROCESSOR 0:306c3 TIME 1384356299 SOCKET 0 APIC 1
<0>[Hardware Error]: CPU 5: Machine Check Exception: 5 Bank 6: be0000000100110a
<0>[Hardware Error]: RIP !INEXACT! 10:<ffffffff81014603> {mwait_idle_with_hints+0xa3/0x100}
<0>[Hardware Error]: TSC 2be268544618d1 ADDR 2c5cca3c0 MISC 1080000086 
<0>[Hardware Error]: PROCESSOR 0:306c3 TIME 1384356299 SOCKET 0 APIC 3
<0>[Hardware Error]: CPU 1: Machine Check Exception: 5 Bank 6: be0000000100110a
<0>[Hardware Error]: RIP !INEXACT! 10:<ffffffff81014603> {mwait_idle_with_hints+0xa3/0x100}
<0>[Hardware Error]: TSC 2be268544618f9 ADDR 2c5cca3c0 MISC 1080000086 
<0>[Hardware Error]: PROCESSOR 0:306c3 TIME 1384356299 SOCKET 0 APIC 2
<0>[Hardware Error]: CPU 2: Machine Check Exception: 5 Bank 6: be0000000100110a
<0>[Hardware Error]: RIP !INEXACT! 10:<ffffffff81014603> {mwait_idle_with_hints+0xa3/0x100}
<0>[Hardware Error]: TSC 2be26854461937 ADDR 2c5cca3c0 MISC 1080000086 
<0>[Hardware Error]: PROCESSOR 0:306c3 TIME 1384356299 SOCKET 0 APIC 4
<0>[Hardware Error]: CPU 6: Machine Check Exception: 5 Bank 6: be0000000100110a
<0>[Hardware Error]: RIP !INEXACT! 10:<ffffffff81014603> {mwait_idle_with_hints+0xa3/0x100}
<0>[Hardware Error]: TSC 2be268544619c3 ADDR 2c5cca3c0 MISC 1080000086 
<0>[Hardware Error]: PROCESSOR 0:306c3 TIME 1384356299 SOCKET 0 APIC 5
<0>[Hardware Error]: CPU 7: Machine Check Exception: 5 Bank 6: be0000000100110a
<0>[Hardware Error]: RIP !INEXACT! 10:<ffffffff81014603> {mwait_idle_with_hints+0xa3/0x100}
<0>[Hardware Error]: TSC 2be2685446197d ADDR 2c5cca3c0 MISC 1080000086 
<0>[Hardware Error]: PROCESSOR 0:306c3 TIME 1384356299 SOCKET 0 APIC 7
<0>[Hardware Error]: CPU 3: Machine Check Exception: 5 Bank 6: be0000000100110a
<0>[Hardware Error]: RIP !INEXACT! 10:<ffffffff81014603> {mwait_idle_with_hints+0xa3/0x100}
<0>[Hardware Error]: TSC 2be2685446195d ADDR 2c5cca3c0 MISC 1080000086 
<0>[Hardware Error]: PROCESSOR 0:306c3 TIME 1384356299 SOCKET 0 APIC 6
<0>[Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: be0000000100110a
<0>[Hardware Error]: TSC 2be2685446176e ADDR 2c5cca3c0 MISC 1080000086 
<0>[Hardware Error]: PROCESSOR 0:306c3 TIME 1384356299 SOCKET 0 APIC 0
<0>[Hardware Error]: Machine check: Processor context corrupt
<0>Kernel panic - not syncing: Fatal Machine check
<4>Pid: 5899, comm: qemu-kvm Tainted: G   M       ---------------    2.6.32-358.18.1.el6.x86_64 #1
<4>Call Trace:
<4> [<ffffffff8150da18>] ? panic+0xa7/0x16f
<4> [<ffffffff8102600f>] ? mce_panic+0x20f/0x230
<4> [<ffffffff81027598>] ? do_machine_check+0xa28/0xa70
<4> [<ffffffff81033871>] ? native_apic_mem_write+0x11/0x20
<4> [<ffffffffa01e794f>] ? kvm_machine_check+0x3f/0x50 [kvm_intel]
<4> [<ffffffffa01ec15b>] ? vmx_vcpu_run+0x6fb/0xad0 [kvm_intel]
<4> [<ffffffffa019a05a>] ? kvm_arch_vcpu_ioctl_run+0x48a/0x1150 [kvm]
<4> [<ffffffffa0182ff4>] ? kvm_vcpu_ioctl+0x434/0x580 [kvm]
<4> [<ffffffff811976c6>] ? pollwake+0x56/0x60
<4> [<ffffffff81063410>] ? default_wake_function+0x0/0x20
<4> [<ffffffff81051439>] ? __wake_up_common+0x59/0x90
<4> [<ffffffff811952f2>] ? vfs_ioctl+0x22/0xa0
<4> [<ffffffff811957ba>] ? do_vfs_ioctl+0x3aa/0x580
<4> [<ffffffff81195a11>] ? sys_ioctl+0x81/0xa0
<4> [<ffffffff810dc685>] ? __audit_syscall_exit+0x265/0x290
<4> [<ffffffff8100b072>] ? system_call_fastpath+0x16/0x1b